Braco Cable Glands are manufactured out of brass castings and are machined accurately to the required sizes. These glands are nickel plated to avoid corrosion while storage and use.
Here at Rujuta Corporation, we stock all the braco cable glands which include Single Compression Braco Cable Glands, Double Compression Braco Cable Glands, Flange type Braco Cable Glands, PG PolyamideBraco Cable Glands, Brass PG Braco Cable Glands, etc. You can purchase these online too. We give best discounts on all our items and have the finest quality. These are manufactured out of brass castings and are machined accurately to the required sizes.
Braco Cable Gland Types
Braco Cable Glands types are categorised based on mateiral & types of construction. Braco cable glands are manufactured in various types depending on the need of indian industrial sector.
Braco Cable Gland are as below:
Single Compression Braco Cable Glands (Commercial Series)
Single Compression Braco Cable Gland are manufactured out of brass castings and are machined accurately to the required sizes. These of Braco Cable Glands are nickel plated to avoid corrosion while storage and use.
Specifications of Single Compression Braco Cable Gland
Standard of Braco Cable Gland: per I.S. 12943:1990
Usage of Braco Cable Gland: Termination for armoured and unarmoured cables.
Sizes in mm: 10 mm, 12 mm, 16 mm, 19 mm, 22 mm, 25 mm, 28 mm, 32 mm, 35 mm, 38 mm, 42 mm, 45 mm, 50 mm, 57 mm, 63 mm, 67 mm, 75 mm, 82 mm, 88 mm
Compression Nut
Brass Body
Three Metal Washers
Rubber Ring
Check Nut
Description of Single Compression Braco Cable Glands
Braco Cable Gland comprises of Brass Body with nipple thread as per I.S. 12943:1990 Compression nut, Check nut, Rubber Ring and three metal washers.
Braco single compression Brass Cable Glands are suitable for armoured /unarmoured cables.
The detail parts are shown in the functional drawing.
These glands are weather proof and water tight and have provision for earthing the armoured cables.
These glands are available in various different sizes and are suitable for all cables up to 1000 sq.mm. and control cables up to 61 cores .
The entry thread on gland body is normally threaded according to IS 1653(Steel conduits for electric wiring).
However if any special kind of thread required, the same can be supplied. The glands can be supplied with special plating such as cadmium, tin or passivated.
Characteristics of Single Compression Braco Cable Gland
Washers of soft metal will be provided for firm gripping of armour
Earth tag will be provided if required at extra cost
PVC protective shrouds can be supplied at extra cost.
Washers between rubber ring are supplied for uniform radial gripping.
Selection of Single Compression Braco Cable Gland
D of cable should be less than D-3
Diameter of cable underneath the overall sheating for unarmoured cable and underneath the armouring for armoured cables is not more than D-34.
Selection of rubber ring is made such that the dia over armouring for armoured cables and dia underneath the overall sheathing for unarmoured cable is less than rubber
Parts of Braco Single Compression Braco Cable Gland
Compression Nut
Brass Body
Three Metal Washers
Rubber Ring
Check Nut
Material of Single Compression Braco Cable Glands
Brass
Finish of Single Compression Braco Cable Glands
Nickle Plated
What is a Single Compression Braco Cable Glands?
Single Compression Glands are manufactured out of brass castings and are machined accurately to the required sizes. These glands are nickel plated to avoid corrosion while storage and use.
Single compression cable glands are fit to use in average climatic conditions, although in addition with PVC shrouds, they can also be used in corrosive settings.
Single Compression Braco Cable Gland Technical Drawing
Braco Single Compression Cable Gland Technical DrawingNote: Braco Single Compression Glands can also be supplied in SS-304/316 if required. Cat no will be SSBC for SS Glands.
Braco Single Compression Glands Size Chart & Technical Data cum Catalogue
Braco Single Compression Gland size chart & technical data cum catalogue is as below:
Glands Ref.
Catalogue No
NIP. OD
CAP. BORING
NIP. ID
A.CROSS.
BODY HIGHT
NIP. HIGHT
B. NUT
RUB. ID
Cable diameter (mm)
E
D-3
D-3 A
D
L-9
L-10
M
A-1
above
unto
BC-3/8″
BC3/8″
1/2″
14
12
20
10.5
6
2
8
9
13.5
BC-1/2″L
BC1/2″L
5/8″
15
13
23
12.5
6.5
2
12
10
14.5
BC-1/2″H
BC1/2″H
5/8″
15
13
23.5
14
7.5
3
12
10
14.5
BC-5/8″L
BC5/8″L
3/4″
15
15
23
14
7
2
12
10
14.5
BC-5/8″H
BC5/8″H
3/4″
15
15
23.5
15
8
3
12
10
14.5
BC-3/4″L
BC3/4″L
3/4″
17.5
15
26
15.5
8
2.5
14
14
17
BC-3/4″H
BC3/4″H
3/4″
17.5
15
27.5
16.5
9
3
14
14
17
BC-7/8″L
BC7/8″L
3/4″
20
15
29
16
8
2.5
16
17
19.5
BC-7/8″H
BC7/8″H
3/4″
20
15
29.5
17
9
3
16
17
19.5
BC-1″L
BC1″L
1″
23.5
21.5
32.5
17.5
8
3
20
19.5
23
BC-1″H
BC1″H
1″
23.5
21
34.5
19
10
3.5
20
19.5
23
BC-1″S
BC1″S
3/4″
23.5
15
32.5
17.5
8
3
18
19.5
23
BC-1-1/8″
BC11/8″
1-1/8″
28
25
39
21
10.5
4
25
23
27
BC-1-1/4″
BC11/4″
1-1/4″
31.5
27
42.5
21
10.5
4
27
27
30
BC-1-3/8″
BC13/8″
1-3/8″
35.5
31
47.5
22
10.5
4.5
31
30
34
BC-1-1/2″
BC11/2″
1-1/2″
39
34
52
22
10.5
4.5
33
34
38
BC-1-3/4″
BC13/4″
1-3/4″
45
40
59
23
11.5
4.5
39
38
44
BC-2″
BC2″
2″
51.5
45
68
23
11.5
4.5
44
44
50
BC-2-1/4″
BC21/4″
2-1/4″
58
52
75
23.5
11.5
5
52
50
56.5
BC-2-1/2″
BC21/2″
2-1/2″
62.5
58
80
25
13
5.5
58
56.5
61
BC-2-3/4″
BC23/4″
2-3/4″
70
65.5
90
28
13.5
5.5
65
61
68
BC-3″
BC3″
3″
76
69.5
100
28
13.5
5.5
70
68
74
BC-3-1/4″
BC31/4″
3-1/4″
82
75
15
29
15
5.5
75
74
80
BC-3-1/2″
BC31/2″
3-1/2″
88
82
117
29
15
6
80
80
86
BC-4″
BC4″
4″
100
92.5
127
36
20
6
86
86
98
BC-4-1/2″
BC41/2″
4-1/2″
108
102
145
38
23
7
90
98
105
Sizes of Braco Single Compression Glands:
Various Sizes of Braco Single Compression Glands are as below:
Pass the compression nut (Pt.1), Washer No.1 (Pt.3) in succession order over the cable before commencing to strip the cable.
Remove the outer sheath to the desired length depending on the length of leads required .Pass the rubber ring(Pt.4) over the armouring upto the outer sheath .
Pass the 2nd washer (Pt. 5) over the armouring and splay out the armour wire one by one and then cut the armour wires according to the sizes of washer Pass the third washer (Pt .6). File the sharp edges of armour wires and bend them so that the armour wires are now secure between the two washers.
Push the assembly through gland body (Pt.2) and tighten the compression nut. While doing so the rubber ring will expand in radial direction and will grip the cable. This will also ensure dust proof entry of the cable
Technical Specification & Cable gland sizes
Glands Ref.
E
D-3
D-3A
D
L-9
L-10
M
RUBBER REF.
A-1
B-1
C-1
SIBG-1216
12
16
12
25.5
15
9
3
R1212
12
18
8
16
19
12
29.5
15
9.5
3.5
R1611
11
20.5
9
SIBG-1616
19
19
15
29.5
15
9.5
3.5
R1613
13
20.5
9
SIBG-1619
R1615
15
20.5
9
SIBG-2119
19
24
15
36.5
18
9.5
3.5
R2116
16
26
11
SIBG-2125
25.4
24
21
36.5
18
9.5
3.5
R2118
18
26
11
R2120
20
26
11
SIBG-2925
25.4
33
21
47
21
10
4
R2921
21
35
12
SIBG-2932
32
33
27
47
21
10
4
R2923
23
35
12
SIBG-2938
38
33
32
47
21
10
4
R2925
25
35
12
R2927
27
35
12
R2929
29
35
12
SIBG-3632
32
41
26
59
22.5
11
4.5
R3631
31
45
14
SIBG-3638
38
41
32
59
22.5
11
4.5
R3633
33
45
14
R3635
35
45
14
R3637
37
45
14
SIBG-4238
38
47
32
71
26
12
5.5
R4236
36
52
17
SIBG-4251
51
47
44.5
71
26
12
5.5
R4238
38
52
17
R4240
40
52
17
R4242
42
52
17
SIBG-5451
51
56
44.5
80
27
12
6
R5444
44
59
18
SIBG-5436
63.5
56
55
80
27
12
6
R5446
46
59
18
R5448
48
59
18
R5450
50
59
18
SIBG-6063
63.5
64
55
92
31
12
6.5
R6053
53
68
18
R6055
55
68
18
R6058
58
68
18
R6060
60
68
18
SIBG-6675
76
68
66
100
33
13
7
R6662
62
72
18
R6664
64
72
18
R6668
68
72
18
SIBG-7882
83
82
72
116
33
14
8
R7870
70
88
20
R7874
74
88
20
R7877
77
88
20
SIBG-8490
90
91
81
124
30
19
8
R8484
84
97
20
SIBG-9210
100
98
91
135
32
20
8
R9292
92
105
20
SIBG-1011
110
107
100
146
32
25
9
R1100
100
114
20
SIBG-1525
125
118
113
164
32
25
10
R1115
115
127
20
Double Compression Brass Glands For Armoured Cable (Weatherproof)
Braco Double Compression Brass Cable Glands are manufactured out of brass rods/castings and are machined accurately to the required sizes. These are nickel plated to avoid corrosion whilst storage and use.
These glands have two moisture proof seals and may be used under most climatic conditions.
These are weather proof and water proof and when protected by a PVC shroud, these can be used under most corrosive conditions. The armour cone and ring gives excellent mechanical and electrical connections.
These Glands are certified by Central Institute of Mining and Fuel Research, Dhanbad for use in weatherproof conditions. These Glands are rated with IP protection upto IP-65 Levels. These glands are as per BS 6121:Part 1:2005 and have parts: Brass body, Armour clamp and Ring, Gland Barrel sealing nut, two seals, , check nut and flat washer between the gland barrel and check nut is provided to prevent the drag on outer seal.
These glands are available in various different sizes and are suitable for all cables up to 1000sq. mm and control cables up to 61 cores. Threads can be ET / mm /NPT as per requirement. However if any special kind of gland or thread is required, the same can be supplied on request.
The gland can also be supplied with any other special plating such as cadmium, tin or pasivated. Also the glands can be supplied made out of aluminum, mild steel or stainless steel
Characteristics of Braco Cable Gland
Clamping cone will be provided with knurling for firm gripping of the armour.
Earthing tag will be provided if required at extra cost
PVC perotective shroud can be supplied at extra cost
Washers between seals are supplied for uniform radial gripping of PCP seals
Installation Instructions of Braco Cable Gland
Remove the outer sheath to the desired length depending on the lenght of the leads required and splay out the armour wire one by one and then cut the same according to the size of armour Clamping cone. File the sharp edges of the armour wire and for the gland as per assembly shown sectionally
Certified by : Central Institute of Mining & Fuel Research
Braco Double Compression Glands are manufactured out of brass rods/castings and are machined accurately to the required sizes. These are nickel plated to avoid corrosion whilst storage and use.
These glands have two moisture proof seals and may be used under most climatic conditions.
These are weather proof and water proof and when protected by a PVC shroud, these can be used under most corrosive conditions.The armour cone and ring gives excellent mechanical and electrical connections.
These Glands are certified by Central Institute of Mining and Fuel Research, Dhanbad for use in Flameproof and weatherproof conditions. These Glands are rated with IP protection upto IP-68 Levels.
These glands are as per BS 6121:Part 1:2005 and have parts: Brass body, Armour clamp and Ring, Gland Barrel sealing nut, two seals, check nut , check nut and flat washer between the gland barrel and check nut is provided to prevent the drag on outer seal.
These glands are available in various different sizes and are suitable for all cables up to 1000sq. mm and control cables up to 61 cores. Threads can be ET / mm /NPT as per requirement. However if any special kind of gland or thread is required, the same can be supplied on request.
The gland can also be supplied with any other special plating such as cadmium, tin or pasivated. Also the glands can be supplied made out of aluminum, mild steel or stainless steel
Parts
Outer Seal
Sealing Nut
Brass Body
Clamping Ring
Armour Clamp
Inner Seal
Flat Washer
Check Nut
Gland Barrel
Technical Specification & Cable gland sizes
BRACO CAT. NO
B
A
A/F E
A/C E1
Nipple thread Inch
Nipple thread Inch
Nipple thread Inch
D
Acceptable cable OD (mm)
Acceptable cable OD (mm)
BRACO CAT. NO
ET
MM
NPT
Above
Upto
BPF-3/8′
13
11
21
24
5/8″
M16
1/2″ NPT
25
8
12
BPF-1/2″
15
11
21
24
5/8″
M16
1/2″ NPT
25
8
13
BPF-001S
14
13
21
24
3/4″
M20
1/2″ NPT
25
8
13
BPF-5/8″
17
14
23
26
3/4″
M20
1/2″ NPT
25
11
15
BPF-001
17
14
24
27.5
3/4″
M20
1/2″ NPT
25
12.5
16.5
BPF-01S
17.5
15
25
29
3/4″
M20
1/2″ NPT
25
12.5
16.5
BPF-01
20
14
27
31
3/4″
M20
1/2″ NPT
25
15
18
BPF-01L
20
15
27
31
1″
M25
3/4″ NPT
25
15
18
BPF-02
20.5
18
30.5
35.5
1″
M25
3/4″ NPT
25
18
20
BPF-02S
20.5
14
30.5
35.5
3/4″
M20
1/2″ NPT
25
18
20
BPF-03
23
18
30.5
35.5
1″
M25
3/4″ NPT
25
20
23
BPF-1″
23
20
30.5
35.5
1″
M25
3/4″ NPT
25
20
23
BPF-04
28
20
37
43
1″
M25
3/4″ NPT
25
23
26
BPF-04L
28
24
37
43
1-1/4″
M32
1″ NPT
25
23
26
BPF-05
31
25
41
47
1-1/4″
M32
1″ NPT
25
26
30
BPF-05L
31
26
41
47
1-1/2″
M40
1-1/4″ NPT
25
26
30
BPF-06
34
31
47
54.5
1-1/2″
M40
1-1/4″ NPT
25
30
33
BPF-06S
34
24
47
54.5
1-1/4″
M32
1″ NPT
25
30
33
BPF-07
39
33
51
59
1-1/2″
M40
1-1/4″ NPT
25
33
37
BPF-08
43
38
54
62
2″
M50
1-1/2″ NPT
25
37
41
BPF-09
47
40
56
65
2″
M50
1-1/2″ NPT
25
41
46
BPF-010
53
44
66
76.5
2″
M50
1-1/2″ NPT
25
46
52
BPF-010L
53
50
66
76.5
2-1/2″
M63
2″ NPT
25
46
52
BPF-011
61
56
80
92
2-1/2″
M63
2″ NPT
25
52
60
BPF-012
68
64
84
97
3″
M75
2-1/2″ NPT
25
60
66
BPF-013S
73
67
90
104
3″
M75
2-1/2″ NPT
25
66
72
BPF-013
79
75
98
113
3-1/4″
M82
3″ NPT
25
72
78
BPF-014
85
78
103
119
3-1/2″
M90
3″ NPT
25
78
83
BPF-015
98
91
112
129
4″
M100
3-1/2″ NPT
25
83
93
BPF-016
106
104
125
144
4-1/2″
M115
4″ NPT
25
93
104
Flange Type Braco Cable Gland
Braco Flange Type Brass Braco Cable Gland are made out of brass castings and are machined accurately to the required sizes. These Braco Flange Type Brass Braco Cable Gland are suitable for armoured cables and are called mechanical glands hence suitable for outdoor application.
The gland comprises of brass body (flange type oval shape) and plate clamped with galavanised mild steel studs and nuts for clamping the armour.
Tapered cone and nut are provided for termination of cable. The cone and body taper is designed for giving a firm grip to the armour of the cable.
Technical Specification & Braco Cable gland sizes
Code No
E(mm)
Max Dia Of Cable
Under Armour Dia
L
Acceptance Dia
Acceptance Dia
Code No
E(mm)
Max Dia Of Cable
Under Armour Dia
L
Min
Max
FL 5
15
16.5
10
13
12
16.5
FL 4
19
19
13.5
13
15
19
FL 3
19.5
20.5
13
13
18.5
20.5
FL 2
25
24.5
19
16.5
20.5
24.5
FL 1
31
30
25.5
15.5
24
30
FL 11
31
34
28
15
29.5
34
FL 0
37.5
35
29.5
21
32.5
35
FL 00
37.5
38
29.5
20
34.5
38
FL 38
42
42
34.5
21.5
37
42
FL 001
49
44
41
20.5
40.5
44
FL 002
53.5
52
46
21.5
43.5
52
FL 003
60
58
52
23
51
58
FL 0033
65
67
56
25.5
56.5
67
FL 004
75
76
65.2
22.5
66
76
FL 005
99
83
88
22.5
75
83
Nylon Braco Cable Gland PG Type (PG & Metric Threads)
Nylon Braco Cable Gland PG Type Braco cable Glands are suitable for unarmoured, plastic or rubber sheathed cables. These glands are made from UL approved Nylon PA-66 grade. These Glands provide IP protection upto IP-68 levels. The Claws and seals of excellent design, sealing nut have a click sound and reopen can hold cable firmly and have a wider cable Range. Resistant to salt water, Weak acid, Alcohol, Oil, Grease and Common Solvency.
Technical Specification & Braco Cable gland sizes
Gland Size
Cable OD Range
Thread OD C1
Thread Length C2
Hex Dimension
Gland Size
Cable OD Range
Thread OD C1
Thread Length C2
Hex Dimension
PPG-7
3-6.5
12.5
8
16
PPG-7 S
2-5
12.5
8
16
PPG-9
4-8
15.2
8
19
PPG-9 S
2-6
15.2
8
19
PPG-11
5-10
18.6
8
22
PPG-11 S
3-7
18.6
8
22
PPG-13.5
6-12
20.4
10
24
PPG-13.5 S
5-9
20.4
10
24
PPG-16
10-14
22.5
10
27
PPG-16 S
7-12
22.5
10
27
PPG-19
12-16
24
10
27
PPG-19 S
10-13
24
10
27
PPG- 21
13-18
28.3
10
33
PPG- 21 S
9-16
28.3
10
33
PPG- 25
16-21
30
11
35
PPG- 25 S
13-18
30
11
35
PPG- 29
18-25
37
12
42
PPG- 29 S
13-20
37
12
42
PPG- 36
22-32
47
14
52
PPG- 36 S
20-26
47
14
52
PPG- 42
32-38
54
14
60
PPG- 42 S
25-31
54
14
60
PPG-48
37-44
59.3
15
64
PPG-48 S
29-35
59.3
15
64
PPG- 63
42-50
71
28
77
PPG- 63 S
32-40
71
28
77
PPG : PG Thread Braco Cable Glands. Suffix ‘S’ is for smaller dia Rubber.
PPGM : Metric Thread Braco Cable Glands. Suffix ‘S’ is for smaller dia Rubber.
Braco single compression Brass Cable Glands are suitable for armoured / unarmoured cables. These are manufactured out of brass castings and are machined accurately to the required sizes These glands are nickel plated to avoid corrosion while storage and use.These indoor and outdoor cable glands are for use with all types of armoured & un-armoured cables, providing environmental seal for outer sheath of cables. The Cable Glands also provides mechanical cable retention and electrical continuity via armour wire termination.
Brand
Braco
Material
Brass
Product Code
Braco Cable Gland
Reviews
There are no reviews yet.
Be the first to review “Braco Cable Gland” Cancel reply
Download catalog
Reviews
There are no reviews yet.