Braco cable gland – Rujuta Corporation – Braco Dealer, Trinity Touch Dealer, Rolycab Dealer https://rujutaent.com Dealers & Distributors of Braco lugs and glands, Trinity Touch Relay cards, Rolycab PVC Channels, Trinity Touch SMPS, Interface modules, Flexible Conduits, Indo Multipole Connector, Target Hooters & tower lights, Rightlock Cable Ties & Control Panel Accessories Fri, 05 May 2023 18:45:19 +0000 en-US hourly 1 https://wordpress.org/?v=7.0.2 https://rujutaent.com/wp-content/uploads/2016/02/cropped-logo-1-50x50.png Braco cable gland – Rujuta Corporation – Braco Dealer, Trinity Touch Dealer, Rolycab Dealer https://rujutaent.com 32 32 Braco Cable Gland https://rujutaent.com/shop/braco-cable-gland/ https://rujutaent.com/shop/braco-cable-gland/#respond Fri, 05 May 2023 18:22:51 +0000 https://rujutaent.com/?post_type=product&p=13409 Braco Cable Glands Braco Cable Glands are manufactured out of brass castings and are machined accurately to the required sizes. These glands are nickel plated to avoid corrosion while storage and use.
  • Material: Brass
  • Plating: Nickel Plated
  • Sizes: 3/8”, 1/2", 5/8”, 3/4”, 7/8", 1”, 1-1/8”, 1-1/4”, 1-3/8”, 1-1/2”, 1-3/4”, 2”, 2-1/4”, 2-1/2”, 2-3/4”, 3”, 3-1/4”, 3-1/2”
  • Standard: per I.S. 12943:1990
  • Usage: Termination for armoured and unarmoured cables.
  • Sizes in mm: 10 mm, 12 mm, 16 mm, 19 mm, 22 mm, 25 mm, 28 mm, 32 mm, 35 mm, 38 mm, 42 mm, 45 mm, 50 mm, 57 mm, 63 mm, 67 mm, 75 mm, 82 mm, 88 mm
  • Compression Nut
  • Brass Body
  • Three Metal Washers
  • Rubber Ring
  • Check Nut
Download catalog IN STOCK, Dispatched Within 2-4 Days HSN Code - 85389000]]> Braco Cable Glands (Commercial Series) Here at Rujuta Corporation, we stock all the braco cable glands which include Single Compression Braco Cable Glands, Double Compression Braco Cable Glands, Flange type Braco Cable Glands, PG PolyamideBraco Cable Glands, Brass PG Braco Cable Glands, etc. You can purchase these online too. We give best discounts on all our items and have the finest quality. These are manufactured out of brass castings and are machined accurately to the required sizes.
Cable gland types and cable gland sizes Braco

Braco Cable Gland Types

Braco Cable Glands types are categorised based on mateiral & types of construction. Braco cable glands are manufactured in various types depending on the need of indian industrial sector. Braco Cable Gland are as below:

Single Compression Braco Cable Glands (Commercial Series)

Single Compression Braco Cable Gland are manufactured out of brass castings and are machined accurately to the required sizes. These of Braco Cable Glands are nickel plated to avoid corrosion while storage and use.

Specifications of Single Compression Braco Cable Gland

  • Material of Braco Cable Gland: Brass
  • Plating of Braco Cable Gland: Nickel Plated
  • Sizes of Braco Cable Gland: 3/8”, 1/2″, 5/8”, 3/4”, 7/8″, 1”, 1-1/8”, 1-1/4”, 1-3/8”, 1-1/2”, 1-3/4”, 2”, 2-1/4”, 2-1/2”, 2-3/4”, 3”, 3-1/4”, 3-1/2”
  • Standard of Braco Cable Gland: per I.S. 12943:1990
  • Usage of Braco Cable Gland: Termination for armoured and unarmoured cables.
  • Sizes in mm: 10 mm, 12 mm, 16 mm, 19 mm, 22 mm, 25 mm, 28 mm, 32 mm, 35 mm, 38 mm, 42 mm, 45 mm, 50 mm, 57 mm, 63 mm, 67 mm, 75 mm, 82 mm, 88 mm
  • Compression Nut
  • Brass Body
  • Three Metal Washers
  • Rubber Ring
  • Check Nut

Description of Single Compression Braco Cable Glands

  • Braco Cable Gland comprises of Brass Body with nipple thread as per I.S. 12943:1990 Compression nut, Check nut, Rubber Ring and three metal washers.
  • Braco single compression Brass Cable Glands are suitable for armoured /unarmoured cables.
  • The detail parts are shown in the functional drawing.
  • These glands are weather proof and water tight and have provision for earthing the armoured cables.
  • These glands are available in various different sizes and are suitable for all cables up to 1000 sq.mm. and control cables up to 61 cores .
  • The entry thread on gland body is normally threaded according to IS 1653(Steel conduits for electric wiring).
  • However if any special kind of thread required, the same can be supplied. The glands can be supplied with special plating such as cadmium, tin or passivated.

Characteristics of Single Compression Braco Cable Gland

  • Washers of soft metal will be provided for firm gripping of armour
  • Earth tag will be provided if required at extra cost
  • PVC protective shrouds can be supplied at extra cost.
  • Washers between rubber ring are supplied for uniform radial gripping.

Selection of Single Compression Braco Cable Gland

  • D of cable should be less than D-3
  • Diameter of cable underneath the overall sheating for unarmoured cable and underneath the armouring for armoured cables is not more than D-34.
  • Selection of rubber ring is made such that the dia over armouring for armoured cables and dia underneath the overall sheathing for unarmoured cable is less than rubber

Parts of Braco Single Compression Braco Cable Gland

  • Compression Nut
  • Brass Body
  • Three Metal Washers
  • Rubber Ring
  • Check Nut

Material of Single Compression Braco Cable Glands

  • Brass

Finish of Single Compression Braco Cable Glands

  • Nickle Plated

What is a Single Compression Braco Cable Glands?

  • Single Compression Glands are manufactured out of brass castings and are machined accurately to the required sizes. These glands are nickel plated to avoid corrosion while storage and use.
  • Single compression cable glands are fit to use in average climatic conditions, although in addition with PVC shrouds, they can also be used in corrosive settings.
 

Single Compression Braco Cable Gland Technical Drawing

Braco Single Compression Cable Gland Technical Drawing
Braco Single Compression Cable Gland Technical Drawing
Note: Braco Single Compression Glands can also be supplied in SS-304/316 if required. Cat no will be SSBC for SS Glands.

Braco Single Compression Glands Size Chart & Technical Data cum Catalogue

Braco Single Compression Gland size chart & technical data cum catalogue is as below:  
Glands Ref. Catalogue No NIP. OD CAP. BORING NIP. ID A.CROSS. BODY HIGHT NIP. HIGHT B. NUT RUB. ID Cable diameter (mm)
E D-3 D-3 A D L-9 L-10 M A-1 above unto
BC-3/8″ BC3/8″ 1/2″ 14 12 20 10.5 6 2 8 9 13.5
BC-1/2″L BC1/2″L 5/8″ 15 13 23 12.5 6.5 2 12 10 14.5
BC-1/2″H BC1/2″H 5/8″ 15 13 23.5 14 7.5 3 12 10 14.5
BC-5/8″L BC5/8″L 3/4″ 15 15 23 14 7 2 12 10 14.5
BC-5/8″H BC5/8″H 3/4″ 15 15 23.5 15 8 3 12 10 14.5
BC-3/4″L BC3/4″L 3/4″ 17.5 15 26 15.5 8 2.5 14 14 17
BC-3/4″H BC3/4″H 3/4″ 17.5 15 27.5 16.5 9 3 14 14 17
BC-7/8″L BC7/8″L 3/4″ 20 15 29 16 8 2.5 16 17 19.5
BC-7/8″H BC7/8″H 3/4″ 20 15 29.5 17 9 3 16 17 19.5
BC-1″L BC1″L 1″ 23.5 21.5 32.5 17.5 8 3 20 19.5 23
BC-1″H BC1″H 1″ 23.5 21 34.5 19 10 3.5 20 19.5 23
BC-1″S BC1″S 3/4″ 23.5 15 32.5 17.5 8 3 18 19.5 23
BC-1-1/8″ BC11/8″ 1-1/8″ 28 25 39 21 10.5 4 25 23 27
BC-1-1/4″ BC11/4″ 1-1/4″ 31.5 27 42.5 21 10.5 4 27 27 30
BC-1-3/8″ BC13/8″ 1-3/8″ 35.5 31 47.5 22 10.5 4.5 31 30 34
BC-1-1/2″ BC11/2″ 1-1/2″ 39 34 52 22 10.5 4.5 33 34 38
BC-1-3/4″ BC13/4″ 1-3/4″ 45 40 59 23 11.5 4.5 39 38 44
BC-2″ BC2″ 2″ 51.5 45 68 23 11.5 4.5 44 44 50
BC-2-1/4″ BC21/4″ 2-1/4″ 58 52 75 23.5 11.5 5 52 50 56.5
BC-2-1/2″ BC21/2″ 2-1/2″ 62.5 58 80 25 13 5.5 58 56.5 61
BC-2-3/4″ BC23/4″ 2-3/4″ 70 65.5 90 28 13.5 5.5 65 61 68
BC-3″ BC3″ 3″ 76 69.5 100 28 13.5 5.5 70 68 74
BC-3-1/4″ BC31/4″ 3-1/4″ 82 75 15 29 15 5.5 75 74 80
BC-3-1/2″ BC31/2″ 3-1/2″ 88 82 117 29 15 6 80 80 86
BC-4″ BC4″ 4″ 100 92.5 127 36 20 6 86 86 98
BC-4-1/2″ BC41/2″ 4-1/2″ 108 102 145 38 23 7 90 98 105

Sizes of Braco Single Compression Glands:

Various Sizes of Braco Single Compression Glands are as below:
Cat no Size in mm Details Size in inch Details
BC3/8″ 10 mm 10 mm Single Compression Gland 3/8″ 3/8″ Single Compression Gland
BC1/2″ 12 mm 12 mm Single Compression Gland 1/2″ 1/2″ Single Compression Gland
BC5/8″ 16 mm 16 mm Single Compression Gland 5/8″ 5/8″ Single Compression Gland
BC3/4″ 19 mm 19 mm Single Compression Gland 3/4″ 3/4″ Single Compression Gland
BC7/8″ 22 mm 22 mm Single Compression Gland 7/8″ 7/8″ Single Compression Gland
BC1″ 25 mm 25 mm Single Compression Gland 1″ 1″ Single Compression Gland
BC1-1/8″ 28 mm 28 mm Single Compression Gland 1-1/8″ 1-1/8″ Single Compression Gland
BC1-1/4″ 32 mm 32 mm Single Compression Gland 1-1/4″ 1-1/4″ Single Compression Gland
BC1-3/8″ 35 mm 35 mm Single Compression Gland 1-3/8″ 1-3/8″ Single Compression Gland
BC1-1/2″ 38 mm 38 mm Single Compression Gland 1-1/2″ 1-1/2″ Single Compression Gland
BC1-3/4″ 45 mm 45 mm Single Compression Gland 1-3/4″ 1-3/4″ Single Compression Gland
BC2″ 50 mm 50 mm Single Compression Gland 2″ 2″ Single Compression Gland
BC2-1/4″ 57 mm 57 mm Single Compression Gland 2-1/4″ 2-1/4″ Single Compression Gland
BC2-1/2″ 63 mm 63 mm Single Compression Gland 2-1/2″ 2-1/2″ Single Compression Gland
BC2-3/4″ 67 mm 67 mm Single Compression Gland 2-3/4″ 2-3/4″ Single Compression Gland
BC3″ 75 mm 75 mm Single Compression Gland 3″ 3″ Single Compression Gland
BC3-1/4″ 82 mm 82 mm Single Compression Gland 3-1/4″ 3-1/4″ Single Compression Gland
BC3-1/2″ 88 mm 88 mm Single Compression Gland 3-1/2″ 3-1/2″ Single Compression Gland
BC4″ 101 mm 101 mm Single Compression Gland 4″ 4″ Single Compression Gland
BC4-1/2″ 114 mm 114 mm Single Compression Gland 4-1/2″ 4-1/2″ Single Compression Gland
Reference: Braco

Single Compression Glands (SIBG series)

  • Pass the compression nut (Pt.1), Washer No.1 (Pt.3) in succession order over the cable before commencing to strip the cable.
  • Remove the outer sheath to the desired length depending on the length of leads required .Pass the rubber ring(Pt.4) over the armouring upto the outer sheath .
  • Pass the 2nd washer (Pt. 5) over the armouring and splay out the armour wire one by one and then cut the armour wires according to the sizes of washer Pass the third washer (Pt .6). File the sharp edges of armour wires and bend them so that the armour wires are now secure between the two washers.
  • Push the assembly through gland body (Pt.2) and tighten the compression nut. While doing so the rubber ring will expand in radial direction and will grip the cable. This will also ensure dust proof entry of the cable

Technical Specification & Cable gland sizes

Glands Ref. E D-3 D-3A D L-9 L-10 M RUBBER REF. A-1 B-1 C-1
SIBG-1216 12 16 12 25.5 15 9 3 R1212 12 18 8
16 19 12 29.5 15 9.5 3.5 R1611 11 20.5 9
SIBG-1616 19 19 15 29.5 15 9.5 3.5 R1613 13 20.5 9
SIBG-1619 R1615 15 20.5 9
SIBG-2119 19 24 15 36.5 18 9.5 3.5 R2116 16 26 11
SIBG-2125 25.4 24 21 36.5 18 9.5 3.5 R2118 18 26 11
R2120 20 26 11
SIBG-2925 25.4 33 21 47 21 10 4 R2921 21 35 12
SIBG-2932 32 33 27 47 21 10 4 R2923 23 35 12
SIBG-2938 38 33 32 47 21 10 4 R2925 25 35 12
R2927 27 35 12
R2929 29 35 12
SIBG-3632 32 41 26 59 22.5 11 4.5 R3631 31 45 14
SIBG-3638 38 41 32 59 22.5 11 4.5 R3633 33 45 14
R3635 35 45 14
R3637 37 45 14
SIBG-4238 38 47 32 71 26 12 5.5 R4236 36 52 17
SIBG-4251 51 47 44.5 71 26 12 5.5 R4238 38 52 17
R4240 40 52 17
R4242 42 52 17
SIBG-5451 51 56 44.5 80 27 12 6 R5444 44 59 18
SIBG-5436 63.5 56 55 80 27 12 6 R5446 46 59 18
R5448 48 59 18
R5450 50 59 18
SIBG-6063 63.5 64 55 92 31 12 6.5 R6053 53 68 18
R6055 55 68 18
R6058 58 68 18
R6060 60 68 18
SIBG-6675 76 68 66 100 33 13 7 R6662 62 72 18
R6664 64 72 18
R6668 68 72 18
SIBG-7882 83 82 72 116 33 14 8 R7870 70 88 20
R7874 74 88 20
R7877 77 88 20
SIBG-8490 90 91 81 124 30 19 8 R8484 84 97 20
SIBG-9210 100 98 91 135 32 20 8 R9292 92 105 20
SIBG-1011 110 107 100 146 32 25 9 R1100 100 114 20
SIBG-1525 125 118 113 164 32 25 10 R1115 115 127 20

Double Compression Brass Glands For Armoured Cable (Weatherproof)

Braco Double Compression Brass Cable Glands are manufactured out of brass rods/castings and are machined accurately to the required sizes. These are nickel plated to avoid corrosion whilst storage and use. These glands have two moisture proof seals and may be used under most climatic conditions. These are weather proof and water proof and when protected by a PVC shroud, these can be used under most corrosive conditions. The armour cone and ring gives excellent mechanical and electrical connections. These Glands are certified by Central Institute of Mining and Fuel Research, Dhanbad for use in weatherproof conditions. These Glands are rated with IP protection upto IP-65 Levels. These glands are as per BS 6121:Part 1:2005 and have parts: Brass body, Armour clamp and Ring, Gland Barrel sealing nut, two seals, , check nut and flat washer between the gland barrel and check nut is provided to prevent the drag on outer seal. These glands are available in various different sizes and are suitable for all cables up to 1000sq. mm and control cables up to 61 cores. Threads can be ET / mm /NPT as per requirement. However if any special kind of gland or thread is required, the same can be supplied on request. The gland can also be supplied with any other special plating such as cadmium, tin or pasivated. Also the glands can be supplied made out of aluminum, mild steel or stainless steel  

Characteristics of Braco Cable Gland

  • Clamping cone will be provided with knurling for firm gripping of the armour.
  • Earthing tag will be provided if required at extra cost
  • PVC perotective shroud can be supplied at extra cost
  • Washers between seals are supplied for uniform radial gripping of PCP seals

Installation Instructions of Braco Cable Gland

Remove the outer sheath to the desired length depending on the lenght of the leads required and splay out the armour wire one by one and then cut the same according to the size of armour Clamping cone. File the sharp edges of the armour wire and for the gland as per assembly shown sectionally

Parts of Braco Cable Gland

  • Outer Seal
  • Sealing Nut
  • Brass Body
  • Clamping Ring
  • Armour Clamp
  • Inner Seal
  • Flat Washer
  • Check Nut
  • Gland Barrel

Technical Specification & Cable gland sizes

BRACO CAT. NO B A A/F E A/C E1 Nipple thread Inch Nipple thread Inch Nipple thread Inch D Acceptable cable OD (mm) Acceptable cable OD (mm)
BRACO CAT. NO ET MM NPT Above Upto
BPW-3/8′ 13 11 21 24 5/8″ M16 1/2″ NPT 12 8 12
BPW-1/2″ 15 11 21 24 5/8″ M16 1/2″ NPT 12 8 13
BPW-001S 14 13 21 24 3/4″ M20 1/2″ NPT 12 8 13
BPW-5/8″ 17 14 23 26 3/4″ M20 1/2″ NPT 15 11 15
BPW-001 17 14 24 27.5 3/4″ M20 1/2″ NPT 15 12.5 16.5
BPW-01S 17.5 15 25 29 3/4″ M20 1/2″ NPT 15 12.5 16.5
BPW-01 20 14 27 31 3/4″ M20 1/2″ NPT 15 15 18
BPW-01L 20 15 27 31 1″ M25 3/4″ NPT 15 15 18
BPW-02 20.5 18 30.5 35.5 1″ M25 3/4″ NPT 15 18 20
BPW-02S 20.5 14 30.5 35.5 3/4″ M20 1/2″ NPT 15 18 20
BPW-03 23 18 30.5 35.5 1″ M25 3/4″ NPT 15 20 23
BPW-1″ 23 20 30.5 35.5 1″ M25 3/4″ NPT 15 20 23
BPW-04 28 20 37 43 1″ M25 3/4″ NPT 15 23 26
BPW-04L 28 24 37 43 1-1/4″ M32 1″ NPT 15 23 26
BPW-05 31 25 41 47 1-1/4″ M32 1″ NPT 15 26 30
BPW-05L 31 26 41 47 1-1/2″ M40 1-1/4″ NPT 15 26 30
BPW-06 34 31 47 54.5 1-1/2″ M40 1-1/4″ NPT 15 30 33
BPW-06S 34 24 47 54.5 1-1/4″ M32 1″ NPT 15 30 33
BPW-07 39 33 51 59 1-1/2″ M40 1-1/4″ NPT 15 33 37
BPW-08 43 38 54 62 2″ M50 1-1/2″ NPT 15 37 41
BPW-09 47 40 56 65 2″ M50 1-1/2″ NPT 15 41 46
BPW-010 53 44 66 76.5 2″ M50 1-1/2″ NPT 20 46 52
BPW-010L 53 50 66 76.5 2-1/2″ M63 2″ NPT 20 46 52
BPW-011 61 56 80 92 2-1/2″ M63 2″ NPT 20 52 60
BPW-012 68 64 84 97 3″ M75 2-1/2″ NPT 20 60 66
BPW-013S 73 67 90 104 3″ M75 2-1/2″ NPT 20 66 72
BPW-013 79 75 98 113 3-1/4″ M82 3″ NPT 20 72 78
BPW-014 85 78 103 119 3-1/2″ M90 3″ NPT 20 78 83
BPW-015 98 91 112 129 4″ M100 3-1/2″ NPT 24 83 93
BPW-016 106 104 125 144 4-1/2″ M115 4″ NPT 25 93 104

Double Compression Brass Braco Cable Gland For Armoured Cable (Flame Proof)

Certified by : Central Institute of Mining & Fuel Research
  • Braco Double Compression Glands are manufactured out of brass rods/castings and are machined accurately to the required sizes. These are nickel plated to avoid corrosion whilst storage and use.
  • These glands have two moisture proof seals and may be used under most climatic conditions.
  • These are weather proof and water proof and when protected by a PVC shroud, these can be used under most corrosive conditions.The armour cone and ring gives excellent mechanical and electrical connections.
  • These Glands are certified by Central Institute of Mining and Fuel Research, Dhanbad for use in Flameproof and weatherproof conditions. These Glands are rated with IP protection upto IP-68 Levels.
  • These glands are as per BS 6121:Part 1:2005 and have parts: Brass body, Armour clamp and Ring, Gland Barrel sealing nut, two seals, check nut , check nut and flat washer between the gland barrel and check nut is provided to prevent the drag on outer seal.
  • These glands are available in various different sizes and are suitable for all cables up to 1000sq. mm and control cables up to 61 cores. Threads can be ET / mm /NPT as per requirement. However if any special kind of gland or thread is required, the same can be supplied on request.
  • The gland can also be supplied with any other special plating such as cadmium, tin or pasivated. Also the glands can be supplied made out of aluminum, mild steel or stainless steel

Parts

  • Outer Seal
  • Sealing Nut
  • Brass Body
  • Clamping Ring
  • Armour Clamp
  • Inner Seal
  • Flat Washer
  • Check Nut
  • Gland Barrel

Technical Specification & Cable gland sizes

BRACO CAT. NO B A A/F E A/C E1 Nipple thread Inch Nipple thread Inch Nipple thread Inch D Acceptable cable OD (mm) Acceptable cable OD (mm)
BRACO CAT. NO ET MM NPT Above Upto
BPF-3/8′ 13 11 21 24 5/8″ M16 1/2″ NPT 25 8 12
BPF-1/2″ 15 11 21 24 5/8″ M16 1/2″ NPT 25 8 13
BPF-001S 14 13 21 24 3/4″ M20 1/2″ NPT 25 8 13
BPF-5/8″ 17 14 23 26 3/4″ M20 1/2″ NPT 25 11 15
BPF-001 17 14 24 27.5 3/4″ M20 1/2″ NPT 25 12.5 16.5
BPF-01S 17.5 15 25 29 3/4″ M20 1/2″ NPT 25 12.5 16.5
BPF-01 20 14 27 31 3/4″ M20 1/2″ NPT 25 15 18
BPF-01L 20 15 27 31 1″ M25 3/4″ NPT 25 15 18
BPF-02 20.5 18 30.5 35.5 1″ M25 3/4″ NPT 25 18 20
BPF-02S 20.5 14 30.5 35.5 3/4″ M20 1/2″ NPT 25 18 20
BPF-03 23 18 30.5 35.5 1″ M25 3/4″ NPT 25 20 23
BPF-1″ 23 20 30.5 35.5 1″ M25 3/4″ NPT 25 20 23
BPF-04 28 20 37 43 1″ M25 3/4″ NPT 25 23 26
BPF-04L 28 24 37 43 1-1/4″ M32 1″ NPT 25 23 26
BPF-05 31 25 41 47 1-1/4″ M32 1″ NPT 25 26 30
BPF-05L 31 26 41 47 1-1/2″ M40 1-1/4″ NPT 25 26 30
BPF-06 34 31 47 54.5 1-1/2″ M40 1-1/4″ NPT 25 30 33
BPF-06S 34 24 47 54.5 1-1/4″ M32 1″ NPT 25 30 33
BPF-07 39 33 51 59 1-1/2″ M40 1-1/4″ NPT 25 33 37
BPF-08 43 38 54 62 2″ M50 1-1/2″ NPT 25 37 41
BPF-09 47 40 56 65 2″ M50 1-1/2″ NPT 25 41 46
BPF-010 53 44 66 76.5 2″ M50 1-1/2″ NPT 25 46 52
BPF-010L 53 50 66 76.5 2-1/2″ M63 2″ NPT 25 46 52
BPF-011 61 56 80 92 2-1/2″ M63 2″ NPT 25 52 60
BPF-012 68 64 84 97 3″ M75 2-1/2″ NPT 25 60 66
BPF-013S 73 67 90 104 3″ M75 2-1/2″ NPT 25 66 72
BPF-013 79 75 98 113 3-1/4″ M82 3″ NPT 25 72 78
BPF-014 85 78 103 119 3-1/2″ M90 3″ NPT 25 78 83
BPF-015 98 91 112 129 4″ M100 3-1/2″ NPT 25 83 93
BPF-016 106 104 125 144 4-1/2″ M115 4″ NPT 25 93 104

Flange Type Braco Cable Gland

  • Braco Flange Type Brass Braco Cable Gland are made out of brass castings and are machined accurately to the required sizes. These Braco Flange Type Brass Braco Cable Gland are suitable for armoured cables and are called mechanical glands hence suitable for outdoor application.
  • The gland comprises of brass body (flange type oval shape) and plate clamped with galavanised mild steel studs and nuts for clamping the armour.
  • Tapered cone and nut are provided for termination of cable. The cone and body taper is designed for giving a firm grip to the armour of the cable.  

Technical Specification & Braco Cable gland sizes

Code No E(mm) Max Dia Of Cable Under Armour Dia L Acceptance Dia Acceptance Dia
Code No E(mm) Max Dia Of Cable Under Armour Dia L Min Max
FL 5 15 16.5 10 13 12 16.5
FL 4 19 19 13.5 13 15 19
FL 3 19.5 20.5 13 13 18.5 20.5
FL 2 25 24.5 19 16.5 20.5 24.5
FL 1 31 30 25.5 15.5 24 30
FL 11 31 34 28 15 29.5 34
FL 0 37.5 35 29.5 21 32.5 35
FL 00 37.5 38 29.5 20 34.5 38
FL 38 42 42 34.5 21.5 37 42
FL 001 49 44 41 20.5 40.5 44
FL 002 53.5 52 46 21.5 43.5 52
FL 003 60 58 52 23 51 58
FL 0033 65 67 56 25.5 56.5 67
FL 004 75 76 65.2 22.5 66 76
FL 005 99 83 88 22.5 75 83

Nylon Braco Cable Gland PG Type (PG & Metric Threads)

Nylon Braco Cable Gland PG Type Braco cable Glands are suitable for unarmoured, plastic or rubber sheathed cables. These glands are made from UL approved Nylon PA-66 grade. These Glands provide IP protection upto IP-68 levels. The Claws and seals of excellent design, sealing nut have a click sound and reopen can hold cable firmly and have a wider cable Range. Resistant to salt water, Weak acid, Alcohol, Oil, Grease and Common Solvency.

Technical Specification & Braco Cable gland sizes

Gland Size Cable OD Range Thread OD C1 Thread Length C2 Hex Dimension
Gland Size Cable OD Range Thread OD C1 Thread Length C2 Hex Dimension
PPG-7 3-6.5 12.5 8 16
PPG-7 S 2-5 12.5 8 16
PPG-9 4-8 15.2 8 19
PPG-9 S 2-6 15.2 8 19
PPG-11 5-10 18.6 8 22
PPG-11 S 3-7 18.6 8 22
PPG-13.5 6-12 20.4 10 24
PPG-13.5 S 5-9 20.4 10 24
PPG-16 10-14 22.5 10 27
PPG-16 S 7-12 22.5 10 27
PPG-19 12-16 24 10 27
PPG-19 S 10-13 24 10 27
PPG- 21 13-18 28.3 10 33
PPG- 21 S 9-16 28.3 10 33
PPG- 25 16-21 30 11 35
PPG- 25 S 13-18 30 11 35
PPG- 29 18-25 37 12 42
PPG- 29 S 13-20 37 12 42
PPG- 36 22-32 47 14 52
PPG- 36 S 20-26 47 14 52
PPG- 42 32-38 54 14 60
PPG- 42 S 25-31 54 14 60
PPG-48 37-44 59.3 15 64
PPG-48 S 29-35 59.3 15 64
PPG- 63 42-50 71 28 77
PPG- 63 S 32-40 71 28 77
PPG : PG Thread Braco Cable Glands. Suffix ‘S’ is for smaller dia Rubber.
PPGM : Metric Thread Braco Cable Glands. Suffix ‘S’ is for smaller dia Rubber.
PPGM-12 x 1.5 3-6.5 M12 8 16
PPGM-12 x 1.5 S 2-5 M12 8 16
PPGM-16 x 1.5 4-8 M16 8 19
PPGM-16 x 1.5 S 2-6 M16 8 19
PPGM-18 x 1.5 5-10 M18 8 22
PPGM-18 x 1.5 S 3-7 M18 8 22
PPGM-20 x 1.5 6-12 M20 10 24
PPGM-20 x 1.5 S 5-9 M20 10 24
PPGM-22 x 1.5 10-14 M22 10 27
PPGM-22 x 1.5 S 7-12 M22 10 27
PPGM-24 x 1.5 12-16 M24 10 27
PPGM-24 x 1.5 S 10-13 M24 10 27
PPGM-25 x 1.5 13-18 M25 10 33
PPGM-25 x 1.5 S 9-16 M25 10 33
PPGM-27 x 1.5 13-18 M27 10 33
PPGM-27 x 1.5 S 9-16 M27 10 33
PPGM-30 x 1.5 16-21 M30 11 35
PPGM-30 x 1.5 S 13-18 M30 11 35
PPGM-32 x 1.5 16-21 M32 11 35
PPGM-32 x 1.5 S 13-18 M32 11 35
PPGM-36 x 1.5 18-25 M36 12 42
PPGM-36 x 1.5 S 13-20 M36 12 42
PPGM-40 x 1.5 22-32 M40 14 52
PPGM-40 x 1.5 S 20-26 M40 14 52
PPGM-50 x 1.5 32-38 M50 14 60
PPGM-50 x 1.5 S 25-31 M50 14 60
PPGM-63 x 1.5 37-44 M63 15 64
PPGM-63 x 1.5 S 29-35 M63 15 64
Link : Braco ]]> https://rujutaent.com/shop/braco-cable-gland/feed/ 0