• Braco Ring Tongue Fork Terminals / lugs are designed to offer maximum efficiency under heavy-duty applications. Therefore these Terminals / lugs are ideal for use in applications which are subject to continous mechancial vibrations Viz. engines, railways, moving components etc. The terminal barrel is brazed and soft annealed, which means that the terminal can be crimped in either direction.
• All the Terminals / lugs are tin plated to avoid oxidisation and to achieve maximum corrossion protection. These Terminals / lugs can be provided with PVC sleeves for protection against electrical shocks and can also be provided with metal reinforced sleeves to maintain a proper grip on conductor insulation.

• Braco soldering type copper Terminals / lugs are made out of EC grade copper and used where high value of current flow is desired and due to soldering loose terminations are avoided, thereby preventing heating at termination ends.
• Terminals / lugs are tin plated to avoid oxidization and to achieve maximum corrossion protection.

• Braco Copper Tube Crimping Terminals / lugs are manufactured from electrolytic copper tube. The dimensions of the tube are designed to obtain the most efficient electrical conductivity and mechanical strength to resist vibration and pull out.
• These are used for terminating any size of cables, electrical switching equipments, where vibration is critical.Terminals / lugs are annealed to guarantee optimum ductility which is an absolute necessity for connectors which will have to withstand the sever deformation arising when compressed and any bending of the palm during installation.
• In application subject to vibration, Terminals / lugs still have to perform a reliable connection.
• Annealing plays a vital role in avoiding cracking or breaks between the barrel and plam. Tin plating on the Terminals / lugs avoids oxidization and achieves maximum corrossion protection.

• Braco Copper Tube Crimping Terminals / lugs With Inspection Hole are manufactured from Electrolytic Copper tube. The dimensions of the tube are designed to obtain the most efficient electrical conductivity and mechanical strength to resist vibration and pull out.
• These are used for terminating any size of cables, electrical switching equipments, where vibration is critical. Terminals / lugs are annealed to guarantee optimum ductility which is an absolute necessity for connectors which will have to withstand the sever deformation arising when compressed and any bending of the palm during installation.
• In applicaion subject to vibration, Terminals / lugs still have to perform a reliable connection, annealing plays a vital role in avoiding cracking or breaks between the barrel and palm.

• Braco Copper Tube Crimping Terminals / lugs are manufactured from Electrolytic Copper tube. The dimensions of the tube are designed to obtain the most efficient electrical conductivity and mechanical strength to resist vibration and pull out.
• These are used for terminating any size of cables to terminating electrical switching equipments, where vibration is critical.
• Terminals / lugs are annealed to guarantee optimum ductility which is an absolute necessity for connectors which will have to withstand the sever deformation arising when compressed and any bending of the palm during installation.
• In applicaion subject to vibration, Terminals / lugs still have to perform a reliable connection, annealing plays a vital role in avoiding cracking or breaks between the barrel and palm.

• Braco Copper Long Palm Terminals / lugs are manufactured from Electrolytic Copper tube. These are used where more secured termination is required as it can easily accomodate two bolts to reduce drift.
• All Terminals / lugs are standard with blank palm and stud holes can be punched to order. These Terminals / lugs are normally used in vibrating application. The presence of inspection hole facilates full insertion of conductor.
• The Terminals / lugs are tin plated to avoid oxidization and to achieve maximum corrossion protection.

• Braco Copper Long Barrel Tube Terminals / lugs are made from high purity copper tube and are annealed to avoid cracking or breaks. The increased barrel length ensures enhanced electrical and mechanical performance in heavy duty application.
• The absence of an inspection hole prevents the entry of water or moisture into crimped joints making them suitable for outdoor applications.
• The Terminals / lugs are tin plated to avoid oxidization and to achieve maximum corrossion protection.

• Braco connectors are designed for jointing low voltage conductors. Made of electrolytic copper tube having the same dimension as CT series lugs, Braco connectors are annealed and electrolytic ally tin plated.
• They feature an internal taper at both ends to ease the introduction of conductor and a dimple (if required) to ensure correct positioning. These connectors can also be provided with insulation.
• Tinning on connectors provides better finish, avoids oxidisation and achieves maximum corrossion protection.

• Braco Copper Crimping Reducer Terminals / lugs are used to terminate one or more Aluminium conductors to a smaller termination area.
• These type of Terminals / lugs are applicable in tunnel type terminal blocks viz. fuse gears, cut-outs, meters etc.
• Braco is able to produce any Copper Reducing Link that you may require.
• The presence of copper at termination end ensures high current carrying capacity at smaller surface area. Tinning avoids oxidisation and provides maximum corrossion protection.

• Braco Copper Crimping Reducer Terminals / lugs are used to terminate one or more Aluminium conductors to a smaller termination area.
• These type of Terminals / lugs are applicable in tunnel type terminal blocks viz. fuse gears, cut-outs, meters etc. Braco is able to produce any Copper Reducing Link that you may require.
• The presence of copper at termination end ensures high current carrying capacity at smaller surface area. Tinning avoids oxidisation and provides maximum corrosion protection.

• Braco Bi-metallic Terminals / lugs for aluminium conductor are manufactured from solid materials by friction welding.
• This method means that aluminium and Copper join through the heat, which develops when aluminium rotates against copper under pressure.
• This is a superior method to give a complete connection between Aluminium and Copper. Barrels are caped and filled with grease so as to avoid oxidisation of the aluminium.

• Braco Aluminium Crimping Terminals / lugs are manufactured out of EC grade extension tubes of purity equal to or greater than 99.5%, having maximum conductivity not less than 60% IACS and are designed as per 1s 5082.
• These are used for terminating all sizes of cables to terminate electrical switching equipments.
• The absence of an inspection hole prevents the entry of water or moisture into crimped joints making them suitable for outdoor applications.

• Braco Aluminium Crimping In-Line Connectors are made out of EC grade extension tubes of purity equal to or greater than 99.5% having maximum conductivity not less than 60% IACS and the designed as per IS 5082.
• These connectors facilitate joining two identical size Aluminium conductors.

• Braco Aluminium Reducer Terminals / lugs are manufactured out of aluminium of purity equal to or greater than 99.5 % having maximum coductivity not less than 60% IACS and are designed as per IS 5082.
• These are used to terminate one or more Aluminium conductors to a smaller termination area. Braco is able to produce any Copper Reducing Link that you may require.

• Braco long barrel aluminium crimping Terminals / lugs are manufactured out EC grade extrusion tubes drawn to the required sizes having minimum conductivity not less than 60% IACS and as per IS 5082.
• These are used for terminating all sizes of cables to terminate electrical switching equipment. The increased barrel length ensures enhanced electrical and mechanical performance due to more number of crimps.
• The absence of inspection hole prevents the entry of water or moisture into crimped joints making them suitable for outdoor applications.

• Braco double hole Aluminium crimping Terminals / lugs which are also known as “Non Rotating Terminals / lugs” are manufactured out of EC Grade Extrusion tubes drawn to the required sizes having minimum conductivity not less than 60% IACS and are designed as per IS 5082.
• The increased barrel length ensures enhanced electrical and mechanical performance due to more number of crimps.
• Two holes ensures non-rotation in the equipment such as transformers,moving equipment where vibration is critical.
• The holes can be punched as per requirements.

• Braco Aluminium alloy tubular bi-metallic Terminals / lugs are manufactured out of aluminium of purity equal to or greater than 99.5 % having maximum coductivity not less than 60% IACS and are designed as per IS 5082.
• These are anti-corrosive and used for highly corrosive environment. The barrels are kept filled with grease so as to avoid oxidization of the Aluminium.
• These are designed to accept a variety of conductor forms especially low stranded compacted conductors.
• These Terminals / lugs are mainly used to terminate on copper bus bars.
• Whenever aluminium ring terminated on to copper or copper based alloy Terminals / lugs without suitable plating, results in the corrossion of the joint over a period leading to higher joint resistance.
• Bi-metallic Terminals / lugs are found most reliable and suitable for such connections.

Braco Cable Glands by Braco Dealer in Thane

Here at Rujuta Corporation, we stock all the braco cable glands which include Single Compression, Double Compression, Flange type, PG Polyamide, Brass PG glands, etc. You can purchase these online too. We give best discounts on all our items and have the finest quality. These are manufactured out of brass castings and are machined accurately to the required sizes.

Braco Cable Gland Types by Braco Dealer in Thane

Braco Cable Glands types are categorised based on mateiral & types of construction. Braco cable glands are manufactured in various types depending on the need of indian industrial sector.

Cable gland types are as below:

Single Compression Glands (Commercial Series) by Braco Dealer in Thane

Braco single compression Brass Cable Glands are suitable for armoured /unarmoured cables. These are manufactured out of brass castings and are machined accurately to the required sizes. These glands are nickel plated to avoid corrosion while storage and use.

Each gland comprises of Brass Body with nipple thread as per I.S. 12943:1990 Compression nut , Check nut, Rubber Ring and three metal washers .The detail parts are shown in the functional drawing.

These glands are weather proof and water tight and have provision for earthing the armoured cables .These glands are available in various different sizes and are suitable for all cables upto 1000 sq .mm. and control cables upto 61 cores .

The entry thread on gland body is normally threaded according to IS 1653(Steel conduits for electric wiring). However if any special kind of thread required, the same can be supplied. The glands can be supplied with special plating such as cadmium,tin or passivated.

Characteristics

• Washers of soft metal will be provided for firm gripping of armour
• Earth tag will be provided if required at extra cost
• PVC protective shrouds can be supplied at extra cost.
• Washers between rubber ring are supplied for uniform radial gripping.

Selection

• O.D of cable should be less than D-3
• Diameter of cable underneath the overall sheating for unarmoured cable and underneath the armouring for armoured cables is not more than D-34.
• Selection of rubber ring is made such that the dia over armouring for armoured cables and dia underneath the overall sheathing for unarmoured cable is less than rubber

Parts

• Compression Nut
• Brass Body
• Three Metal Washers
• Rubber Ring
• Check Nut

Material

• Brass

Finish

• Nickle Plated

Technical Specification & Cable gland sizes

Note: These Glands can also be supplied in SS-304/316 if required. Cat no will be SSBC for SS Glands.

Glands	NIP. OD	CAP. BORING	NIP. ID	A.CROSS.	BODY HIGHT	NIP. HIGHT	B. NUT	RUB. ID	Cable diameter (mm)	Cable diameter (mm)
Cat no	E	D-3	D-3 A	D	L-9	L-10	M	A-1	above	upto
BC-3/8″	1/2″	14	12	20	10.5	6	2	8	9	13.5
BC-1/2″L	5/8″	15	13	23	12.5	6.5	2	12	10	14.5
BC-1/2″H	5/8″	15	13	23.5	14	7.5	3	12	10	14.5
BC-5/8″L	3/4″	15	15	23	14	7	2	12	10	14.5
BC-5/8″H	3/4″	15	15	23.5	15	8	3	12	10	14.5
BC-3/4″L	3/4″	17.5	15	26	15.5	8	2.5	14	14	17
BC-3/4″H	3/4″	17.5	15	27.5	16.5	9	3	14	14	17
BC-7/8″L	3/4″	20	15	29	16	8	2.5	16	17	19.5
BC-7/8″H	3/4″	20	15	29.5	17	9	3	16	17	19.5
BC-1″L	1	23.5	21.5	32.5	17.5	8	3	20	19.5	23
BC-1″H	1	23.5	21	34.5	19	10	3.5	20	19.5	23
BC-1″S	3/4″	23.5	15	32.5	17.5	8	3	18	19.5	23
BC-1-1/8″	1-1/8″	28	25	39	21	10.5	4	25	23	27
BC-1-1/4″	1-1/4″	31.5	27	42.5	21	10.5	4	27	27	30
BC-1-3/8″	1-3/8″	35.5	31	47.5	22	10.5	4.5	31	30	34
BC-1-1/2″	1-1/2″	39	34	52	22	10.5	4.5	33	34	38
BC-1-3/4″	1-3/4″	45	40	59	23	11.5	4.5	39	38	44
BC-2″	2″	51.5	45	68	23	11.5	4.5	44	44	50
BC-2-1/4″	2-1/4″	58	52	75	23.5	11.5	5	52	50	56.5
BC-2-1/2″	2-1/2″	62.5	58	80	25	13	5.5	58	56.5	61
BC-2-3/4″	2-3/4″	70	65.5	90	28	13.5	5.5	65	61	68
BC-3″	3″	76	69.5	100	28	13.5	5.5	70	68	74
BC-3-1/4″	3-1/4″	82	75	15	29	15	5.5	75	74	80
BC-3-1/2″	3-1/2″	88	82	117	29	15	6	80	80	86
BC-4″	4″	100	92.5	127	36	20	6	86	86	98
BC-4-1/2″	4-1/2″	108	102	145	38	23	7	90	98	105

Single Compression Glands (SIBG series) by Braco Dealer in Thane

• Pass the compression nut (Pt.1), Washer No.1 (Pt.3) in succession order over the cable before commencing to strip the cable.
• Remove the outer sheath to the desired length depending on the length of leads required .Pass the rubber ring(Pt.4) over the armouring upto the outer sheath .
• Pass the 2nd washer (Pt. 5) over the armouring and splay out the armour wire one by one and then cut the armour wires according to the sizes of washer Pass the third washer (Pt .6). File the sharp edges of armour wires and bend them so that the armour wires are now secure between the two washers.
• Push the assembly through gland body (Pt.2) and tighten the compression nut. While doing so the rubber ring will expand in radial direction and will grip the cable. This will also ensure dust proof entry of the cable

Technical Specification & Cable gland sizes

Glands Ref.	E	D-3	D-3A	D	L-9	L-10	M	RUBBER REF.	A-1	B-1	C-1
SIBG-1216	12	16	12	25.5	15	9	3	R1212	12	18	8
	16	19	12	29.5	15	9.5	3.5	R1611	11	20.5	9
SIBG-1616	19	19	15	29.5	15	9.5	3.5	R1613	13	20.5	9
SIBG-1619								R1615	15	20.5	9
SIBG-2119	19	24	15	36.5	18	9.5	3.5	R2116	16	26	11
SIBG-2125	25.4	24	21	36.5	18	9.5	3.5	R2118	18	26	11
								R2120	20	26	11
SIBG-2925	25.4	33	21	47	21	10	4	R2921	21	35	12
SIBG-2932	32	33	27	47	21	10	4	R2923	23	35	12
SIBG-2938	38	33	32	47	21	10	4	R2925	25	35	12
								R2927	27	35	12
								R2929	29	35	12
SIBG-3632	32	41	26	59	22.5	11	4.5	R3631	31	45	14
SIBG-3638	38	41	32	59	22.5	11	4.5	R3633	33	45	14
								R3635	35	45	14
								R3637	37	45	14
SIBG-4238	38	47	32	71	26	12	5.5	R4236	36	52	17
SIBG-4251	51	47	44.5	71	26	12	5.5	R4238	38	52	17
								R4240	40	52	17
								R4242	42	52	17
SIBG-5451	51	56	44.5	80	27	12	6	R5444	44	59	18
SIBG-5436	63.5	56	55	80	27	12	6	R5446	46	59	18
								R5448	48	59	18
								R5450	50	59	18
SIBG-6063	63.5	64	55	92	31	12	6.5	R6053	53	68	18
								R6055	55	68	18
								R6058	58	68	18
								R6060	60	68	18
SIBG-6675	76	68	66	100	33	13	7	R6662	62	72	18
								R6664	64	72	18
								R6668	68	72	18
SIBG-7882	83	82	72	116	33	14	8	R7870	70	88	20
								R7874	74	88	20
								R7877	77	88	20
SIBG-8490	90	91	81	124	30	19	8	R8484	84	97	20
SIBG-9210	100	98	91	135	32	20	8	R9292	92	105	20
SIBG-1011	110	107	100	146	32	25	9	R1100	100	114	20
SIBG-1525	125	118	113	164	32	25	10	R1115	115	127	20

Double Compression Brass Glands For Armoured Cable (Weatherproof) by Braco Dealer in Thane

Braco Double Compression Brass Cable Glands are manufactured out of brass rods/castings and are machined accurately to the required sizes. These are nickel plated to avoid corrosion whilst storage and use.
These glands have two moisture proof seals and may be used under most climatic conditions.

These are weather proof and water proof and when protected by a PVC shroud, these can be used under most corrosive conditions. The armour cone and ring gives excellent mechanical and electrical connections.

These Glands are certified by Central Institute of Mining and Fuel Research, Dhanbad for use in weatherproof conditions. These Glands are rated with IP protection upto IP-65 Levels. These glands are as per BS 6121:Part 1:2005 and have parts: Brass body, Armour clamp and Ring, Gland Barrel sealing nut, two seals, , check nut and flat washer between the gland barrel and check nut is provided to prevent the drag on outer seal.

These glands are available in various different sizes and are suitable for all cables up to 1000sq. mm and control cables up to 61 cores. Threads can be ET / mm /NPT as per requirement. However if any special kind of gland or thread is required, the same can be supplied on request.

The gland can also be supplied with any other special plating such as cadmium, tin or pasivated. Also the glands can be supplied made out of aluminum, mild steel or stainless steel  

Characteristics

• Clamping cone will be provided with knurling for firm gripping of the armour.
• Earthing tag will be provided if required at extra cost
• PVC perotective shroud can be supplied at extra cost
• Washers between seals are supplied for uniform radial gripping of PCP seals

Installation Instructions

Remove the outer sheath to the desired length depending on the lenght of the leads required and splay out the armour wire one by one and then cut the same according to the size of armour Clamping cone. File the sharp edges of the armour wire and for the gland as per assembly shown sectionally

Parts

• Outer Seal
• Sealing Nut
• Brass Body
• Clamping Ring
• Armour Clamp
• Inner Seal
• Flat Washer
• Check Nut
• Gland Barrel

Technical Specification & Cable gland sizes

BRACO CAT. NO	B	A	A/F E	A/C E1	Nipple thread Inch	Nipple thread Inch	Nipple thread Inch	D	Acceptable cable OD (mm)	Acceptable cable OD (mm)
BRACO CAT. NO					ET	MM	NPT		Above	Upto
BPW-3/8′	13	11	21	24	5/8″	M16	1/2″ NPT	12	8	12
BPW-1/2″	15	11	21	24	5/8″	M16	1/2″ NPT	12	8	13
BPW-001S	14	13	21	24	3/4″	M20	1/2″ NPT	12	8	13
BPW-5/8″	17	14	23	26	3/4″	M20	1/2″ NPT	15	11	15
BPW-001	17	14	24	27.5	3/4″	M20	1/2″ NPT	15	12.5	16.5
BPW-01S	17.5	15	25	29	3/4″	M20	1/2″ NPT	15	12.5	16.5
BPW-01	20	14	27	31	3/4″	M20	1/2″ NPT	15	15	18
BPW-01L	20	15	27	31	1″	M25	3/4″ NPT	15	15	18
BPW-02	20.5	18	30.5	35.5	1″	M25	3/4″ NPT	15	18	20
BPW-02S	20.5	14	30.5	35.5	3/4″	M20	1/2″ NPT	15	18	20
BPW-03	23	18	30.5	35.5	1″	M25	3/4″ NPT	15	20	23
BPW-1″	23	20	30.5	35.5	1″	M25	3/4″ NPT	15	20	23
BPW-04	28	20	37	43	1″	M25	3/4″ NPT	15	23	26
BPW-04L	28	24	37	43	1-1/4″	M32	1″ NPT	15	23	26
BPW-05	31	25	41	47	1-1/4″	M32	1″ NPT	15	26	30
BPW-05L	31	26	41	47	1-1/2″	M40	1-1/4″ NPT	15	26	30
BPW-06	34	31	47	54.5	1-1/2″	M40	1-1/4″ NPT	15	30	33
BPW-06S	34	24	47	54.5	1-1/4″	M32	1″ NPT	15	30	33
BPW-07	39	33	51	59	1-1/2″	M40	1-1/4″ NPT	15	33	37
BPW-08	43	38	54	62	2″	M50	1-1/2″ NPT	15	37	41
BPW-09	47	40	56	65	2″	M50	1-1/2″ NPT	15	41	46
BPW-010	53	44	66	76.5	2″	M50	1-1/2″ NPT	20	46	52
BPW-010L	53	50	66	76.5	2-1/2″	M63	2″ NPT	20	46	52
BPW-011	61	56	80	92	2-1/2″	M63	2″ NPT	20	52	60
BPW-012	68	64	84	97	3″	M75	2-1/2″ NPT	20	60	66
BPW-013S	73	67	90	104	3″	M75	2-1/2″ NPT	20	66	72
BPW-013	79	75	98	113	3-1/4″	M82	3″ NPT	20	72	78
BPW-014	85	78	103	119	3-1/2″	M90	3″ NPT	20	78	83
BPW-015	98	91	112	129	4″	M100	3-1/2″ NPT	24	83	93
BPW-016	106	104	125	144	4-1/2″	M115	4″ NPT	25	93	104

Double Compression Brass Cable Glands For Armoured Cable (Flame Proof) by Braco Dealer in Thane

Certified by : Central Institute of Mining & Fuel Research

Braco Double Compression Glands are manufactured out of brass rods/castings and are machined accurately to the required sizes. These are nickel plated to avoid corrosion whilst storage and use. These glands have two moisture proof seals and may be used under most climatic conditions.

These are weather proof and water proof and when protected by a PVC shroud, these can be used under most corrosive conditions. The armour cone and ring gives excellent mechanical and electrical connections.
These Glands are certified by Central Institute of Mining and Fuel Research, Dhanbad for use in Flameproof and weatherproof conditions. These Glands are rated with IP protection upto IP-68 Levels.

These glands are as per BS 6121:Part 1:2005 and have parts: Brass body, Armour clamp and Ring, Gland Barrel sealing nut, two seals, check nut , check nut and flat washer between the gland barrel and check nut is provided to prevent the drag on outer seal.

These glands are available in various different sizes and are suitable for all cables up to 1000sq. mm and control cables up to 61 cores. Threads can be ET / mm /NPT as per requirement. However if any special kind of gland or thread is required, the same can be supplied on request.

The gland can also be supplied with any other special plating such as cadmium, tin or pasivated. Also the glands can be supplied made out of aluminum, mild steel or stainless steel

Parts

• Outer Seal
• Sealing Nut
• Brass Body
• Clamping Ring
• Armour Clamp
• Inner Seal
• Flat Washer
• Check Nut
• Gland Barrel

Technical Specification & Cable gland sizes

BRACO CAT. NO	B	A	A/F E	A/C E1	Nipple thread Inch	Nipple thread Inch	Nipple thread Inch	D	Acceptable cable OD (mm)	Acceptable cable OD (mm)
BRACO CAT. NO					ET	MM	NPT		Above	Upto
BPF-3/8′	13	11	21	24	5/8″	M16	1/2″ NPT	25	8	12
BPF-1/2″	15	11	21	24	5/8″	M16	1/2″ NPT	25	8	13
BPF-001S	14	13	21	24	3/4″	M20	1/2″ NPT	25	8	13
BPF-5/8″	17	14	23	26	3/4″	M20	1/2″ NPT	25	11	15
BPF-001	17	14	24	27.5	3/4″	M20	1/2″ NPT	25	12.5	16.5
BPF-01S	17.5	15	25	29	3/4″	M20	1/2″ NPT	25	12.5	16.5
BPF-01	20	14	27	31	3/4″	M20	1/2″ NPT	25	15	18
BPF-01L	20	15	27	31	1″	M25	3/4″ NPT	25	15	18
BPF-02	20.5	18	30.5	35.5	1″	M25	3/4″ NPT	25	18	20
BPF-02S	20.5	14	30.5	35.5	3/4″	M20	1/2″ NPT	25	18	20
BPF-03	23	18	30.5	35.5	1″	M25	3/4″ NPT	25	20	23
BPF-1″	23	20	30.5	35.5	1″	M25	3/4″ NPT	25	20	23
BPF-04	28	20	37	43	1″	M25	3/4″ NPT	25	23	26
BPF-04L	28	24	37	43	1-1/4″	M32	1″ NPT	25	23	26
BPF-05	31	25	41	47	1-1/4″	M32	1″ NPT	25	26	30
BPF-05L	31	26	41	47	1-1/2″	M40	1-1/4″ NPT	25	26	30
BPF-06	34	31	47	54.5	1-1/2″	M40	1-1/4″ NPT	25	30	33
BPF-06S	34	24	47	54.5	1-1/4″	M32	1″ NPT	25	30	33
BPF-07	39	33	51	59	1-1/2″	M40	1-1/4″ NPT	25	33	37
BPF-08	43	38	54	62	2″	M50	1-1/2″ NPT	25	37	41
BPF-09	47	40	56	65	2″	M50	1-1/2″ NPT	25	41	46
BPF-010	53	44	66	76.5	2″	M50	1-1/2″ NPT	25	46	52
BPF-010L	53	50	66	76.5	2-1/2″	M63	2″ NPT	25	46	52
BPF-011	61	56	80	92	2-1/2″	M63	2″ NPT	25	52	60
BPF-012	68	64	84	97	3″	M75	2-1/2″ NPT	25	60	66
BPF-013S	73	67	90	104	3″	M75	2-1/2″ NPT	25	66	72
BPF-013	79	75	98	113	3-1/4″	M82	3″ NPT	25	72	78
BPF-014	85	78	103	119	3-1/2″	M90	3″ NPT	25	78	83
BPF-015	98	91	112	129	4″	M100	3-1/2″ NPT	25	83	93
BPF-016	106	104	125	144	4-1/2″	M115	4″ NPT	25	93	104

Flange Type Cable Glands by Braco Dealer in Thane

Braco Flange Type Brass Cable Glands are made out of brass castings and are machined accurately to the required sizes. These glands are suitable for armoured cables and are called mechanical glands hence suitable for outdoor application.
The gland comprises of brass body (flange type oval shape) and plate clamped with galavanised mild steel studs and nuts for clamping the armour. Tapered cone and nut are provided for termination of cable.
The cone and body taper is designed for giving a firm grip to the armour of the cable.  

Technical Specification & Cable gland sizes

Code No	E(mm)	Max Dia Of Cable	Under Armour Dia	L	Acceptance Dia	Acceptance Dia
Code No	E(mm)	Max Dia Of Cable	Under Armour Dia	L	Min	Max
FL 5	15	16.5	10	13	12	16.5
FL 4	19	19	13.5	13	15	19
FL 3	19.5	20.5	13	13	18.5	20.5
FL 2	25	24.5	19	16.5	20.5	24.5
FL 1	31	30	25.5	15.5	24	30
FL 11	31	34	28	15	29.5	34
FL 0	37.5	35	29.5	21	32.5	35
FL 00	37.5	38	29.5	20	34.5	38
FL 38	42	42	34.5	21.5	37	42
FL 001	49	44	41	20.5	40.5	44
FL 002	53.5	52	46	21.5	43.5	52
FL 003	60	58	52	23	51	58
FL 0033	65	67	56	25.5	56.5	67
FL 004	75	76	65.2	22.5	66	76
FL 005	99	83	88	22.5	75	83

Nylon Cable Glands PG Type (PG & Metric Threads)

Braco Nylon PG type Glands are suitable for unarmoured, plastic or rubber sheathed cables. These glands are made from UL approved Nylon PA-66 grade. These Glands provide IP protection upto IP-68 levels. The Claws and seals of excellent design, sealing nut have a click sound and reopen can hold cable firmly and have a wider cable Range. Resistant to salt water, Weak acid, Alcohol, Oil, Grease and Common Solvency.

Technical Specification & Cable gland sizes

Gland Size	Cable OD Range	Thread OD C1	Thread Length C2	Hex Dimension
Gland Size	Cable OD Range	Thread OD C1	Thread Length C2	Hex Dimension
PPG-7	3-6.5	12.5	8	16
PPG-7 S	2-5	12.5	8	16
PPG-9	4-8	15.2	8	19
PPG-9 S	2-6	15.2	8	19
PPG-11	5-10	18.6	8	22
PPG-11 S	3-7	18.6	8	22
PPG-13.5	6-12	20.4	10	24
PPG-13.5 S	5-9	20.4	10	24
PPG-16	10-14	22.5	10	27
PPG-16 S	7-12	22.5	10	27
PPG-19	12-16	24	10	27
PPG-19 S	10-13	24	10	27
PPG- 21	13-18	28.3	10	33
PPG- 21 S	9-16	28.3	10	33
PPG- 25	16-21	30	11	35
PPG- 25 S	13-18	30	11	35
PPG- 29	18-25	37	12	42
PPG- 29 S	13-20	37	12	42
PPG- 36	22-32	47	14	52
PPG- 36 S	20-26	47	14	52
PPG- 42	32-38	54	14	60
PPG- 42 S	25-31	54	14	60
PPG-48	37-44	59.3	15	64
PPG-48 S	29-35	59.3	15	64
PPG- 63	42-50	71	28	77
PPG- 63 S	32-40	71	28	77
PPG : PG Thread Glands. Suffix ‘S’ is for smaller dia Rubber.
PPGM : Metric Thread Glands. Suffix ‘S’ is for smaller dia Rubber.
PPGM-12 x 1.5	3-6.5	M12	8	16
PPGM-12 x 1.5 S	2-5	M12	8	16
PPGM-16 x 1.5	4-8	M16	8	19
PPGM-16 x 1.5 S	2-6	M16	8	19
PPGM-18 x 1.5	5-10	M18	8	22
PPGM-18 x 1.5 S	3-7	M18	8	22
PPGM-20 x 1.5	6-12	M20	10	24
PPGM-20 x 1.5 S	5-9	M20	10	24
PPGM-22 x 1.5	10-14	M22	10	27
PPGM-22 x 1.5 S	7-12	M22	10	27
PPGM-24 x 1.5	12-16	M24	10	27
PPGM-24 x 1.5 S	10-13	M24	10	27
PPGM-25 x 1.5	13-18	M25	10	33
PPGM-25 x 1.5 S	9-16	M25	10	33
PPGM-27 x 1.5	13-18	M27	10	33
PPGM-27 x 1.5 S	9-16	M27	10	33
PPGM-30 x 1.5	16-21	M30	11	35
PPGM-30 x 1.5 S	13-18	M30	11	35
PPGM-32 x 1.5	16-21	M32	11	35
PPGM-32 x 1.5 S	13-18	M32	11	35
PPGM-36 x 1.5	18-25	M36	12	42
PPGM-36 x 1.5 S	13-20	M36	12	42
PPGM-40 x 1.5	22-32	M40	14	52
PPGM-40 x 1.5 S	20-26	M40	14	52
PPGM-50 x 1.5	32-38	M50	14	60
PPGM-50 x 1.5 S	25-31	M50	14	60
PPGM-63 x 1.5	37-44	M63	15	64
PPGM-63 x 1.5 S	29-35	M63	15	64

Link : Braco