Download catalogDescription
CIMRE1SS8/24/OM – 1CO 8CH 24VDC Connectwell Relay Module (SPDT) Omron Relay Rail Mounted
- Fully-enclosed IP20 rated design
- Custom configurations up to 32 channels
- Long Tail Jumpers.
- Ergonomic for wiring ease
- High quality standards and approvals
- Long-life laser marking
- Additional all-axis marking provision
- Over voltage category: III
- Pollution degree :2
- Option to select Pluggable/Soldered Relays
- Standard and reverse type marking option available.
- Low Coil Drive Current (4.7 mA to 100 mA).
- LED indication to denote relay actuation.
- Freewheeling diode across relay coil.
- 8 Channel Relay board
TECHNICAL DATA of CIMRE1SS8/24/OM:
Bussing Possiblity:By using spare jumpers.*****
Supply Voltage Indication:3mm Red LED
Relay Protection Method:Using 1N4007 Free Wheeling Diode
Ambient Operating Temperature:-20 to 50 ?C
Mounting Possibility:DIN 35/DIN 35-15 Rail
Housing Material:PC
Housing Colour:Grey
Rated Input voltage:24 VDC
Rated Voltage:24 VDC
Rated output Currrent/channel:10 A
RELAY INPUT / COIL SPECIFICATIONS of 8 Channel Relay Board:
Nominal Operating Voltage:24 VDC
Nominal Input Current:16.7 mA
Maximum Operating Voltage:31.2 VDC
Must Operate Voltage:16.8 VDC
Must Release Voltage:2.4 VDC
Nominal Input Power:400 mW
Coil Resistance:1440 ?
RELAY OUTPUT/CONTACT SPECIFICATIONS of CIMRE1SS8/24/OM:
Contact Type:SPDT – 1CO
Contact Material:Ag-alloy (Cd free)
Contact Resistance:100 m? max.
Rated Contact Current (Resistive Load):12 A
Load Voltage Range:250VAC/30VDC
Maximum Switching Voltage:440 VAC
Maximum Operating Frequency:18000 Opr./Hr (Mechanical)
CONNECTION SPECIFICATIONS of CIMRE1SS8/24/OM:
Type of Connection:Screw Connection
Min. Wire Size:0.5 mm?
Max. Wire Size:2.5 mm?
Min. Wire Size(AWG):20 AWG
Max. Wire Size(AWG):12 AWG
Screw Size:M2.5
Wire Stripping Length:8 mm
Torque:0.4 Nm
Torque:3.5 lb-in
Advantages of CIMRE 1CO 8CH 24VDC Connwctwell Relay Module against tradition designs:
- Completely enclosed design assures no-shock hazards with an IP20 protection.
- Ensures that critical components are not exposed to heat or dust deterioration, which can reduce the life of the module or cause untimely component failure.
- Aesthetically enhanced look of the product is an ideal fit in modern control cabinets.
- Accommodate last minute changes or circuit extensions without replacing the existing module.
- Achieve multiple configurations (2 + 4 = 6 or 8 + 4 + 2 = 14) for up to 32 channels, with the unique ?extension cable? accessory
True 10 Amperes performance
- No more compromises. Unleash the complete potential of relays with 70micron PCB track and screw connection technology proven over a billion times. CIMRE modules are the only solution which can guarantee a load current of 10 amperes.
- Large guided wire entry points ensure quick, easy and error-free wire insertion, with or without ferrules/lugs.
- Individually assigned LEDs for relay status indication with clear, laser-marked channel identification.
Pre-installed long tail jumpers
- Easy-to-use, long tail jumpers enable quick and easy creation of common negative circuits.
- Safe IP20 socket design to connect jumpers and easily accessible pockets for parking the jumpers, when not in use.
- A small but important design detail is the use of high-visibility and long-lasting laser markings on the module. This replaces sticker marking, which often fades, peels or wears-off.
Compact and secure mounting
- Compact enclosure gives 35% volumetric saving with a robust, spring-loaded latching mechanism that secures mounting on the DIN rail.
- A large vertical, flush-mounted area for marking is built into the CIMRE module. With the GMH8 accessory, raised horizontal markings can also be achieved, providing all round visibility.
High quality standards and approvals
- The CIMRE Module complies with the IEC 60664 standards for insulation coordination and these Relay Module are assembled with UL approved components.
| ORDERING INFORMATION | ||||||||||||||||||||||||
| CAT. NO. | DESCRIPTION | NO. OF CHN. | DIM. DET. | STD. PACK | ||||||||||||||||||||
| CIMRE1SS8/24/OM | 1CO 8CH 24VDC CW Relay Module With Base (Pluggable Relay) Rail Mount | 4 | 149.5 x 77 x 44 | 1 | ||||||||||||||||||||
| CIMRE1S4/24/OM | 1CO 8CH 24VDC CW Relay Module With Soldered Relay Rail Mount | 4 | 149.5 x 77 x 40 | 1 | ||||||||||||||||||||
|
||||||||||||||||||||||||
Reviews
There are no reviews yet.