• Braco Ring Tongue Fork Terminals / lugs are designed to offer maximum efficiency under heavy-duty applications. Therefore these Terminals / lugs are ideal for use in applications which are subject to continous mechancial vibrations Viz. engines, railways, moving components etc. The terminal barrel is brazed and soft annealed, which means that the terminal can be crimped in either direction.
• All the Terminals / lugs are tin plated to avoid oxidisation and to achieve maximum corrossion protection. These Terminals / lugs can be provided with PVC sleeves for protection against electrical shocks and can also be provided with metal reinforced sleeves to maintain a proper grip on conductor insulation.

• Braco soldering type copper Terminals / lugs are made out of EC grade copper and used where high value of current flow is desired and due to soldering loose terminations are avoided, thereby preventing heating at termination ends.
• Terminals / lugs are tin plated to avoid oxidization and to achieve maximum corrossion protection.

• Braco Copper Tube Crimping Terminals / lugs are manufactured from electrolytic copper tube. The dimensions of the tube are designed to obtain the most efficient electrical conductivity and mechanical strength to resist vibration and pull out.
• These are used for terminating any size of cables, electrical switching equipments, where vibration is critical.Terminals / lugs are annealed to guarantee optimum ductility which is an absolute necessity for connectors which will have to withstand the sever deformation arising when compressed and any bending of the palm during installation.
• In application subject to vibration, Terminals / lugs still have to perform a reliable connection.
• Annealing plays a vital role in avoiding cracking or breaks between the barrel and plam. Tin plating on the Terminals / lugs avoids oxidization and achieves maximum corrossion protection.

• Braco Copper Tube Crimping Terminals / lugs With Inspection Hole are manufactured from Electrolytic Copper tube. The dimensions of the tube are designed to obtain the most efficient electrical conductivity and mechanical strength to resist vibration and pull out.
• These are used for terminating any size of cables, electrical switching equipments, where vibration is critical. Terminals / lugs are annealed to guarantee optimum ductility which is an absolute necessity for connectors which will have to withstand the sever deformation arising when compressed and any bending of the palm during installation.
• In applicaion subject to vibration, Terminals / lugs still have to perform a reliable connection, annealing plays a vital role in avoiding cracking or breaks between the barrel and palm.

• Braco Copper Tube Crimping Terminals / lugs are manufactured from Electrolytic Copper tube. The dimensions of the tube are designed to obtain the most efficient electrical conductivity and mechanical strength to resist vibration and pull out.
• These are used for terminating any size of cables to terminating electrical switching equipments, where vibration is critical.
• Terminals / lugs are annealed to guarantee optimum ductility which is an absolute necessity for connectors which will have to withstand the sever deformation arising when compressed and any bending of the palm during installation.
• In applicaion subject to vibration, Terminals / lugs still have to perform a reliable connection, annealing plays a vital role in avoiding cracking or breaks between the barrel and palm.

• Braco Copper Long Palm Terminals / lugs are manufactured from Electrolytic Copper tube. These are used where more secured termination is required as it can easily accomodate two bolts to reduce drift.
• All Terminals / lugs are standard with blank palm and stud holes can be punched to order. These Terminals / lugs are normally used in vibrating application. The presence of inspection hole facilates full insertion of conductor.
• The Terminals / lugs are tin plated to avoid oxidization and to achieve maximum corrossion protection.

• Braco Copper Long Barrel Tube Terminals / lugs are made from high purity copper tube and are annealed to avoid cracking or breaks. The increased barrel length ensures enhanced electrical and mechanical performance in heavy duty application.
• The absence of an inspection hole prevents the entry of water or moisture into crimped joints making them suitable for outdoor applications.
• The Terminals / lugs are tin plated to avoid oxidization and to achieve maximum corrossion protection.

• Braco connectors are designed for jointing low voltage conductors. Made of electrolytic copper tube having the same dimension as CT series lugs, Braco connectors are annealed and electrolytic ally tin plated.
• They feature an internal taper at both ends to ease the introduction of conductor and a dimple (if required) to ensure correct positioning. These connectors can also be provided with insulation.
• Tinning on connectors provides better finish, avoids oxidisation and achieves maximum corrossion protection.

• Braco Copper Crimping Reducer Terminals / lugs are used to terminate one or more Aluminium conductors to a smaller termination area.
• These type of Terminals / lugs are applicable in tunnel type terminal blocks viz. fuse gears, cut-outs, meters etc.
• Braco is able to produce any Copper Reducing Link that you may require.
• The presence of copper at termination end ensures high current carrying capacity at smaller surface area. Tinning avoids oxidisation and provides maximum corrossion protection.

• Braco Copper Crimping Reducer Terminals / lugs are used to terminate one or more Aluminium conductors to a smaller termination area.
• These type of Terminals / lugs are applicable in tunnel type terminal blocks viz. fuse gears, cut-outs, meters etc. Braco is able to produce any Copper Reducing Link that you may require.
• The presence of copper at termination end ensures high current carrying capacity at smaller surface area. Tinning avoids oxidisation and provides maximum corrosion protection.

• Braco Bi-metallic Terminals / lugs for aluminium conductor are manufactured from solid materials by friction welding.
• This method means that aluminium and Copper join through the heat, which develops when aluminium rotates against copper under pressure.
• This is a superior method to give a complete connection between Aluminium and Copper. Barrels are caped and filled with grease so as to avoid oxidisation of the aluminium.

• Braco Aluminium Crimping Terminals / lugs are manufactured out of EC grade extension tubes of purity equal to or greater than 99.5%, having maximum conductivity not less than 60% IACS and are designed as per 1s 5082.
• These are used for terminating all sizes of cables to terminate electrical switching equipments.
• The absence of an inspection hole prevents the entry of water or moisture into crimped joints making them suitable for outdoor applications.

• Braco Aluminium Crimping In-Line Connectors are made out of EC grade extension tubes of purity equal to or greater than 99.5% having maximum conductivity not less than 60% IACS and the designed as per IS 5082.
• These connectors facilitate joining two identical size Aluminium conductors.

• Braco Aluminium Reducer Terminals / lugs are manufactured out of aluminium of purity equal to or greater than 99.5 % having maximum coductivity not less than 60% IACS and are designed as per IS 5082.
• These are used to terminate one or more Aluminium conductors to a smaller termination area. Braco is able to produce any Copper Reducing Link that you may require.

• Braco long barrel aluminium crimping Terminals / lugs are manufactured out EC grade extrusion tubes drawn to the required sizes having minimum conductivity not less than 60% IACS and as per IS 5082.
• These are used for terminating all sizes of cables to terminate electrical switching equipment. The increased barrel length ensures enhanced electrical and mechanical performance due to more number of crimps.
• The absence of inspection hole prevents the entry of water or moisture into crimped joints making them suitable for outdoor applications.

• Braco double hole Aluminium crimping Terminals / lugs which are also known as “Non Rotating Terminals / lugs” are manufactured out of EC Grade Extrusion tubes drawn to the required sizes having minimum conductivity not less than 60% IACS and are designed as per IS 5082.
• The increased barrel length ensures enhanced electrical and mechanical performance due to more number of crimps.
• Two holes ensures non-rotation in the equipment such as transformers,moving equipment where vibration is critical.
• The holes can be punched as per requirements.

• Braco Aluminium alloy tubular bi-metallic Terminals / lugs are manufactured out of aluminium of purity equal to or greater than 99.5 % having maximum coductivity not less than 60% IACS and are designed as per IS 5082.
• These are anti-corrosive and used for highly corrosive environment. The barrels are kept filled with grease so as to avoid oxidization of the Aluminium.
• These are designed to accept a variety of conductor forms especially low stranded compacted conductors.
• These Terminals / lugs are mainly used to terminate on copper bus bars.
• Whenever aluminium ring terminated on to copper or copper based alloy Terminals / lugs without suitable plating, results in the corrossion of the joint over a period leading to higher joint resistance.
• Bi-metallic Terminals / lugs are found most reliable and suitable for such connections.

Braco Cable Glands by PESO Gland Flameproof Braco

Here at Rujuta Corporation, we stock all the braco cable glands which include Single Compression, Double Compression, Flange type, PG Polyamide, Brass PG glands, etc. You can purchase these online too. We give best discounts on all our items and have the finest quality. These are manufactured out of brass castings and are machined accurately to the required sizes.

Braco Cable Gland Types by PESO Gland Flameproof Braco

Braco Cable Glands types are categorised based on mateiral & types of construction. Braco cable glands are manufactured in various types depending on the need of indian industrial sector.

Cable gland types are as below:

Single Compression Glands (Commercial Series) by PESO Gland Flameproof Braco

Braco single compression Brass Cable Glands are suitable for armoured /unarmoured cables. These are manufactured out of brass castings and are machined accurately to the required sizes. These glands are nickel plated to avoid corrosion while storage and use.

Each gland comprises of Brass Body with nipple thread as per I.S. 12943:1990 Compression nut , Check nut, Rubber Ring and three metal washers .The detail parts are shown in the functional drawing.

These glands are weather proof and water tight and have provision for earthing the armoured cables .These glands are available in various different sizes and are suitable for all cables upto 1000 sq .mm. and control cables upto 61 cores .

The entry thread on gland body is normally threaded according to IS 1653(Steel conduits for electric wiring). However if any special kind of thread required, the same can be supplied. The glands can be supplied with special plating such as cadmium,tin or passivated.

Characteristics of PESO Gland Flameproof Braco

• Washers of soft metal will be provided for rm gripping of armour
• Earth tag will be provided if required at extra cost
• PVC protective shrouds can be supplied at extra cost.
• Washers between rubber ring are supplied for uniform radial gripping.

Link : Braco