Download catalogDescription
DDFL4U – Desciption
- DDFL4U blocks have fuse carrier link on the top level and a separate feed through terminal connection at the lower level.
- This eliminates the use of additional Terminal Block
TECHNICAL DATA of DDFL4U
- Rated Voltage: 800 V
- Rated Current: 6.3 A
- Tightening Torque: 0.5 Nm
- Housing Material: Polyamide
- Product Function: Double Level Fuse
- Wire Entry Orientation: Side Entry
- Mounting Possibility: DIN 32/DIN 35/DIN 35-15 Rail
- Screw Size: M3
- Operated by: Screwdriver
- Rated Surge Voltage: 5 KV
- Pollution Degree: 3
CONNECTION DATA of DDFL4U
- Conductor Cross Section Stranded min.: 0.2 mm²
- Conductor Cross Section Stranded max.: 4 mm²
- Conductor Cross Section AWG/Kcmil min: 22 AWG
- Conductor Cross Section AWG/Kcmil max: 10 AWG
- Conductor Cross Section Stranded with Ferrule/Lug min: 0.2 mm²
- Conductor Cross Section Stranded with Ferrule/Lug max: 4 mm²
- 2 Conductors with same Cross Section Stranded min: 0.2 mm²
- 2 Conductor with same Cross Section Stranded max: 2.5 mm²
- Conductor Cross Section Solid min: 0.2 mm²
- Conductor Cross Section Solid max: 6 mm²
- 2 Conductors with same Cross Section Stranded with TWIN Ferrule/Lug min: 0.2 mm²
- 2 Conductor with same Cross Section Stranded with TWIN Ferrule/Lug max: 2.5 mm²
- Stripping Length: 9.5 mm
- Internal Cylindrical Guage: A4
DIMENSIONS of DDFL4U
- Height with DIN 32 rail 71.4 mm
- Height with DIN 35 x 15 mm rail 74.3 mm
- Height with DIN 35 x 7.5 mm rail 67.4 mm
- Length 88 mm
- Width (Thickness) 8 mm
FUSE SPECIFICATIONS of DDFL4U
- Fuse Type Cartridge: glass fuse
- Fuse Size: 5 x 20 mm
- Fuse Current Rating: 6.3 A
ACCESSORIES of DDFL4U
| ACCESSORIES | ||||||||||||||||||
|
||||||||||||||||||
|
||||||||||||||||||
|
||||||||||||||||||
|
||||||||||||||||||
|
||||||||||||||||||
|
||||||||||||||||||
|
||||||||||||||||||
|
||||||||||||||||||
|
||||||||||||||||||
|
||||||||||||||||||
Get DDFL4U at Best Price in India at Rujuta Corporation
- Best DDFL4U Distributor in India Best No#1 in Mumbai – Rujuta Corporation
- – Rujuta Corporation is India’s no#1 Distributor, Dealer & Stockist of Connectwell Terminal blocks, Relay cards, Markers, SMPS & other accessories.
- Top Connectwell Authorised Dealers in India – Rujuta Corporation contact details are as below:
- Address: G-14B, Devkaran Mansion Compound, Gate no 9, Pathakwadi, Princess Street, Mumbai-400002
- Contact us: Nilesh Sanghvi 9082463426 / 9820825440
Karan Sanghvi 8169580098 / 9769789105
Disha Sanghvi 022-39567213 - Email: rujutaent@gmail.com
Approvals of DDFL4U
- UL
- CSA
- VDE,
- ATEX
- CE
- And More
DDFL4U & other Fuse Terminal Blocks
- DDFL4U & These Terminal Blocks are used in electrical and control systems which require fuse protection. The DDFL4U series Terminal Blocks accepts industry-standard Ø5 x 20mm and Ø5 x 25 mm cartridge fuses.
- These are 8 mm thick Terminal Blocks with a provision to hold a spare fuse (in the non LED version).
- CF4SP series fuse terminals have a thickness of 6 mm with a provision for using screw-type jumpers.
- These terminals can be used in an alternating configuration with CTS2.5UN, CTS2.5UE, CTS4UN and CF4SPFT feed-through terminals. CF4UL & CF4SPL series terminals have a built-in LED circuit which gives an offline indication in case of a fuse blow out.
- The CAFL series terminals accept ؼ” x 1″ and ؼ” x 1¼” (Ø6.3 x 32 mm) fuses.
- Fuse blocks with suffix (L), (N) are used for an off-line indication in case of a fuse blow out. These blocks offered by Top Connectwell Authorised Dealers in India can be used with AC & DC voltages.
 |
CF4U |
 |
 |
CF4UL |
|
 |
DDFL4U |
|
 |
DDFL4UE |
|
PRODUCTS AND SYSTEM CERTIFICATION of DDFL4U Fuse Terminal Block
Products and System Certification for DDFL4U Fuse Terminal Block
Reputed product approvals and certifications like UL, CSA, VDE, ATEX and CE and quality systems which adhere to ISO 9001:2015 are essential for Connectwell DDFL4U Fuse Terminal Block, as this speaks about the quality we would deliver to our customers. We understand and believe that reliable and predictable service is essential, hence the approvals are required to sustain in the global market.
Why these certifications are important for DDFL4U Fuse Terminal Block?
• Safety of DDFL4U Fuse Terminal Block: We ensure that our products comply with relevant safety standards, while government regulations are generally intended to protect populations from potential risks associated with products.
• Quality of DDFL4U Fuse Terminal Block: We assure the best quality of products.
• Consistency of DDFL4U Fuse Terminal Block: We want to be sure our marketed products comply with the sample assessed. We want to build consistency in our products through assessment and market survey.
Who is benefited from these certifications for DDFL4U Fuse Terminal Block?
• Governments: Can reduce barriers caused by different certification criteria of countries.
• Industry: Can reduce delays and costs of multiple testing since a product can be certified once by a single National Certification Body (NCB) which can be accepted by others worldwide, usually without the need for further product assessment. It reduces the time of market acceptability.
• End-users: However anyone using a product which has been tested and certified using the certifications and product approvals has the assurance that the goods purchased will perform as per expectations and are reasonably safe when used as intended.
Types of Certifications and Product Approvals for DDFL4U Fuse Terminal Block
• UL(Underwriters Laboratories) approvals are on par with UL standards. Products can be used in industrial applications without restrictions, Connectwell Products are generally tested and recognized under UL 1059 standard. Connectwell has the inhouse UL accredited Laboratory. Our quality control laboratory has been approved for ‘Witness Test Data Program’ by Underwriters Laboratories (UL). This ensures that the quality testing carried out by our laboratory is not only accurate but also acceptable to the most stringent third-party product testing organizations
• CSA (Canadian Standards Association) is the solution to marketing in Canada and the United States. Our products are certified as per the CSA 22.2 standards.
• CE marking is a certification mark that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area. This certification follows the European directives.
• LR (Lyold’s Register) is the marine application certification. This certification is available for a wide range of products that can be used in marine and offshore applications & industrial plant and processes.
• IECCB Operated by the IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components. Test reports and certificates dealing with the safety of electrical and electronic components, equipment and products.
• Modular Terminal Blocks solution for Explosive Atmosphere. The ATEX – IECEx Directive besides taking into account the electrical sources of the explosion, also considers potentially explosive concentrations of gas, vapour or mist along with dust in the air.
• Condition of Safe Use – increased safety “e” for DDFL4U Fuse Terminal Block
The Terminal Blocks are suitable to mount on DIN35/ DIN32/ DIN15 as applicable. The Terminal blocks are suitable for use in ATEX / IECEx certified enclosure with a minimum IP rating of IP 54. The terminal block has to be built into the enclosure with the type of protection “t” (complying with IEC/EN60079-31)” standard when placed in dust atmosphere. The terminal blocks are suitable for maximum service temperature 85°C, considering the self-heating when used at rated current with specified maximum conductor size & at an ambient temperature range of -40°C to +40°C at mounting position.
When the Terminal Blocks are used in electrical apparatus, the highest temperature of the insulating material shall not exceed the max value of the temperature 85 °C. When these terminal blocks are mounted, the minimum creepage and clearance distances shall be maintained for respective voltage rating, with neighbouring terminal blocks. Proper care should be taken for stranded wire type of connection in terminal blocks so that conductors do not get damaged while installation.
Installation instruction – Intrinsic Safety “i” for DDFL4U Fuse Terminal Block
IEC/EN 60079-14 Clause 12 states Modular Terminal Blocks as simple apparatus when used in intrinsically safe circuits.
Testing by a notified body and marking is not required. If Terminal Blocks are identified as part of an intrinsically circuit are marked by colour, the colour used shall be light blue. Testing for compliance to intrinsically safe requirements including clearance, creep age, and solid insulation distances specified in IEC/EN 60079-0 and IEC/EN 60079-11 have been performed for circuits up to 60 V. Compliance with distance requirements of IEC/EN 60079-14 Clause 12.2.3 for the connection of separated intrinsically safe circuit accessories are met. A minimum distance of 50 mm to separate clamping units of intrinsically safe and non-intrinsically safe circuits is required by using a partition plate or spacer or similar device.
System Approval ISO 9001:2015 for DDFL4U Fuse Terminal Block
At Connectwell the Product Development cycle, production & assembly of components and supply are all controlled by an ISO 9001:2015 Quality Management System for DDFL4U Fuse Terminal Block.
The RoHS (Restriction of Hazardous Substances) Directive 2011/65/EU dated 8th June 2011 addresses the restriction of the use of certain hazardous substances in electrical and electronic equipment for DDFL4U Fuse Terminal Block.
Producers of certain categories of electrical and electronic equipment cannot use high levels of the following six banned substances:
• Lead (Pb)
• Hexavalent chromium (Cr-VI)
• Mercury (Hg)
• Cadmium (Cd)
• Polybrominated biphenyls (PBB) [flame retardant]
• Polybrominated diphenyl ether (PBDE) [flame retardant]
On 4 June 2015, the EU Commission has published a new Directive (EU) 2015/863 to amend Annex II to EU RoHS 2 (Directive 2011/65/EU) to add the following 4 phthalates onto the list of restricted substances
• Bis(2-Ethylhexyl) phthalate (DEHP)
• Benzyl butyl phthalate (BBP)
• Dibutyl phthalate (DBP)
• Diisobutyl phthalate (DIBP)
REACH Compliance for DDFL4U Fuse Terminal Block
REACH for DDFL4U double decker fuse terminal block is the regulation (EC) No 1907/2006 of the European Parliament and the Council of 18, concerning the Registration, Evaluation, Authorization and Restriction of Chemicals. Implemented on 1st June 2007, REACH for DDFL4U Fuse Terminal Block requires the registration of some 30000 chemical substances (over 11 years) in use today, a process which will allow to fill information gaps on the hazards of substances and to identify appropriate risk management measures to ensure their safe use. European Chemical Agency (ECHA) has listed various Substances of Very High Concern (SVHC).
Connectwell Products not only fulfil Customers’ needs and requirements of standards and specifications but also surpass the same. More than four decades of incessant dedication and commitment have made Connectwell a synonym for ….THE RIGHT CONNECTION.
- DDFL4U Fuse Terminal Block is ideal for use in applications requiring high density wiring.
- In the ODL series DDFL4U Fuse Terminal Block, the top level is offset from the bottom level by half the thickness of the DDFL4U Fuse Terminal Block.
VISION AND MISSION for DDFL4U Fuse Terminal Block
- Connectwell is committed to provide safe, reliable and efficient control & connection solutions in line with ever changing technology requirements.
- Empowering domestic and global customers with products of the highest quality standards, with a competitive edge and at superior service levels.
- Creating a work culture that encourages individual growth, teamspirit and creativity; helping us overcome challenges and attain goals.
- Deploying fair & ethical business practices for the growth of our vendors and maximize returns to our share holders.
- Contributing towards the welfare of our community and follow environment friendly practices
- Over the 40 years we have been manufacturing terminal blocks, we have always benchmarked ourselves against the most demanding standards in the world. And our goal at every stage has always been, to beat the benchmarks.
About DDFL4U Fuse Terminal Block
- Connectwell is the leading manufacturer of DDFL4U Fuse Terminal Block in India. Rujuta Corporation is their Authorized distributor.
- In addition to Din Rail and PCB Terminal Blocks, Connectwell now offers a large range of products including Interface Modules, Professional Tools and Switching Power Supplies.
- Connectwell’s wide spread sales network is well complemented by excellent infrastructure dedicated to processes like Product Design, Plastic Injection Moulding, Compression Moulding, Sheet Metal Processing, Tool Design & Manufacturing.
- Connectwell works with quality systems which adhere to ISO 9001:2015 standard and all processes and systems are mapped in SAP R/3 ERP system.
- Product approvals and certifications like UL, CSA, VDE, ATEX and CE verify the quality levels that can be expected of Connectwell.
- More than three decades of incessant dedication and commitment have made Connectwell a synonym for THE RIGHT CONNECTION.
QUALITY & SYSTEMS for DDFL4U Fuse Terminal Block
It begins at the beginning:
- Quality has to begin where the manufacturing process begins — with the raw materials.
- Our UL compliant plastic materials are UV stabilized, Flame retardant and halogen free, to safely withstand the harshest environments.
- All the copper and alloys for our current conducting components are chosen for maximum conductivity and minimum contact resistance.
- All metal clamping components are crafted from steel alloys including stainless steel to ensure the highest corrosion resistance.
When the best works with the best:
- Quality is integral to every aspect of our manufacturing process.
- We have spared no expense in sourcing the very best in manufacturing and testing equipment from around the world, to bring together a state-of-the-art, fully automated plant designed to consistently produce products of the highest quality.
- Except that we don’t rest on that assurance — we test it.
Is our primary business quality control for DDFL4U double decker fuse terminal block
- We admit it – we do take testing to a level beyond all reasonable expectations.
- There are 38 different tests that a Terminal Block has to undergo to pass Connectwell’s obsessively demanding quality assurance program.
- Many of these are tests mandated by International Standards, but our tests don’t always stop there.After several decades of observing the unpredictable abuses our products often have to withstand, Connectwell’s tests frequently go beyond the accepted norms.
- A case in point is our 96 hour Salt Spray testing of electroplated metal parts. Or our enhanced torque requirement norms for our screw terminals – a full 50% higher than recommended values.
We are our toughest critics:
- To ensure that the Terminals are tested with the right parameters, the testing conditions have to be accurate.
- In 2009 Underwriters Laboratories Inc. recognized the Connectwell Test Lab under the Witness Test Data Program.
- The Lab is also recognized under Witness Manufacturer’s Test program of IEC.
- Today the Connectwell Test Lab is recognized by major international testing bodies as a benchmark for customer-conducted testing.
Meeting every global and industry-specific standard for DDFL4U double decker fuse terminal block:
- Most of our Terminal Blocks are compliant with UL1059, UL486e standards for North American markets. They also comply with IEC 60947 standard for Terminal Blocks for the global markets.
- These standards ensure that Connectwell Terminal Blocks meet the requirements of the most demanding customers, anywhere in the world.
- Moreover, to meet the Industry specific challenges and to satisfy the reliability requirements of specific industries, Connectwell Terminal Blocks also comply with the Lloyd’s Register and Bureau Veritas certification programs for Ship building and Marine Industry.
- Some of the most stringent testing norms are recommended when Terminal Blocks are used in Hazardous Locations like Refineries, Petro Chemical plants and continuous process industries.
- Connectwell has a wide variety of Terminal Blocks compliant with ATEX, IECEx, AEex and IN Metro standards.
How well you can correct also counts
- Of course we leave nothing to chance. Of course we are obsessive about testing. But no system is perfect.
- What makes one better than the rest is how well — and how quickly — you can take corrective action when something goes wrong.
- Our Automated Logistic centre enables complete traceability of materials, thereby enabling a robust batch management process.
- This is essential for implementing quality quarantines and product recalls, if they are ever needed.
Exceeding standards – and expectations for DDFL4U Fuse Terminal Block
- Over the last four decades, we have worked in every possible environment, from railways to critical process plants, from the oil and gas industry to power plants.
- And across all these applications, working with many different sets of customers, we have learnt one lesson we have taken to heart: no part, no component ever gets used exactly as it was designed to be used.
- Abuse in the field isn’t just a possibility it is inevitable over the life of any product.
- Which is why we go well beyond the benchmarks set by the world’s most respected standards in our product design and manufacture as well as our Quality Control.
Link: Connectwell
Reviews
There are no reviews yet.